Datasheet4U Logo Datasheet4U.com

74VHC541-Q100 - Octal buffer/line driver

General Description

The 74VHC541-Q100; 74VHCT541-Q100 are high-speed Si-gate CMOS devices.

The 74VHC541-Q100; 74VHCT541-Q100 are octal non-inverting buffer/line drivers with 3-state bus compatible outputs.

The 3-state outputs are controlled by the output enable inputs OE0 and OE1.

Key Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Balanced propagation delays.
  • All inputs have a Schmitt-trigger action.
  • Inputs accepts voltages higher than VCC.
  • The 74VHC541-Q100 operates with CMOS input level.
  • The 74VHCT541-Q100 operates with TTL input level.
  • ESD protection:.
  • MIL-STD-883, method 3015 exceeds 2000 V.
  • HBM JES.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74VHC541-Q100 Octal buffer/line driver NXP
74VHC541 OCTAL BUS BUFFER STMicroelectronics
74VHC541 Octal Buffer/Line Driver Fairchild Semiconductor
74VHC541 Octal buffer/line driver NXP
74VHC540 Octal Bus Buffer Motorola

Other Datasheets by Nexperia

Part Number Description
74VHC541 Octal buffer/line driver
74VHC595 8-bit serial-in/serial-out or parallel-out shift register
74VHC595-Q100 8-bit serial-in/serial-out or parallel-out shift register
74VHC02 Quad 2-input NOR gate
74VHC02-Q100 Quad 2-input NOR gate

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74VHC541-Q100; 74VHCT541-Q100 Octal buffer/line driver; 3-state Rev. 2 — 3 September 2020 Product data sheet 1. General description The 74VHC541-Q100; 74VHCT541-Q100 are high-speed Si-gate CMOS devices. The 74VHC541-Q100; 74VHCT541-Q100 are octal non-inverting buffer/line drivers with 3-state bus compatible outputs. The 3-state outputs are controlled by the output enable inputs OE0 and OE1. A HIGH on OEn causes the outputs to assume a high-impedance OFF-state. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.