Datasheet4U Logo Datasheet4U.com

TC74VCX125FK - Low-Voltage Quad Bus Buffer

Description

2.

The TC74VCX125FK is a high-performance CMOS quad bus buffer which is guaranteed to operate from 1.2 V to 3.6 V.

Features

  • (1) Low-voltage operation: VCC = 1.2 to 3.6 V (2) High-speed operation: tpd = 2.8 ns (max) (VCC = 3.0 to 3.6 V) tpd = 3.4 ns (max) (VCC = 2.3 to 2.7 V) tpd = 6.8 ns (max) (VCC = 1.65 to 1.95 V) tpd = 13.6 ns (max) (VCC = 1.4 to 1.6 V) tpd = 34.0 ns (max) (VCC = 1.2 V) (3) Output current: IOH/IOL = ±24 mA (min) (VCC = 3.0 V) IOH/IOL = ±18 mA (min) (VCC = 2.3 V) IOH/IOL = ±6 mA (min) (VCC = 1.65 V) IOH/IOL = ±2 mA (min) (VCC = 1.4 V) (4) Latch-up performance: -300 mA (5) ESD performance: Human Bod.

📥 Download Datasheet

Datasheet preview – TC74VCX125FK

📁 Similar Datasheet

  • TC74VCX2125FK - Low-Voltage Quad Bus Buffer (Toshiba Semiconductor)
  • TC74VCX2573FK - Low-Voltage Octal D-Type Latch (Toshiba Semiconductor)
  • TC74VCX2573FT - Low-Voltage Octal D-Type Latch (Toshiba Semiconductor)
  • TC74VHC03F - Quad 2-Input NAND Gate (Toshiba Semiconductor)
  • TC74VHC03FK - Quad 2-Input NAND Gate (Toshiba Semiconductor)
  • TC74VHC03FN - Quad 2-Input NAND Gate (Toshiba Semiconductor)
  • TC74VHC03FT - Quad 2-Input NAND Gate (Toshiba Semiconductor)
  • TC74VHC9273FK - Octal D-Type Flip-Flop (Toshiba Semiconductor)
  • TC74VHC9273FT - CMOS Digital Integrated Circuit Silicon Monolithic (Toshiba Semiconductor)
  • TC74VHC9273P - Octal D-Type Flip-Flop (Toshiba Semiconductor)
Other Datasheets by Toshiba

Full PDF Text Transcription

Click to expand full text
CMOS Digital Integrated Circuits Silicon Monolithic TC74VCX125FK TC74VCX125FK 1. Functional Description • Low-Voltage Quad Bus Buffer with 3.6-V Tolerant Inputs and Outputs 2. General The TC74VCX125FK is a high-performance CMOS quad bus buffer which is guaranteed to operate from 1.2 V to 3.6 V. Designed for use in 1.5 V, 1.8 V, 2.5 V or 3.3 V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. It is also designed with overvoltage tolerant inputs and outputs up to 3.6 V. This device requires the 3-state control input OE to be set high to place the output into the high impedance state. All inputs are equipped with protection circuits against static discharge. 3. Features (1) Low-voltage operation: VCC = 1.2 to 3.6 V (2) High-speed operation: tpd = 2.
Published: |