Datasheet4U Logo Datasheet4U.com

TC74VCX125FT - Low-Voltage Quad Bus Buffer

General Description

2.

The TC74VCX125FT is a high-performance CMOS quad bus buffer which is guaranteed to operate from 1.2 V to 3.6 V.

Key Features

  • (1) Wide operating temperature range: Topr = -40 to 125  (Note 1) (2) Low-voltage operation: VCC = 1.2 to 3.6 V (3) High-speed operation: tpd = 2.8 ns (max) (VCC = 3.0 to 3.6 V) tpd = 3.4 ns (max) (VCC = 2.3 to 2.7 V) tpd = 6.8 ns (max) (VCC = 1.65 to 1.95 V) tpd = 13.6 ns (max) (VCC = 1.4 to 1.6 V) tpd = 34.0 ns (max) (VCC = 1.2 V) (4) Output current: IOH/IOL = ±24 mA (min) (VCC = 3.0 V) IOH/IOL = ±18 mA (min) (VCC = 2.3 V) IOH/IOL = ±6 mA (min) (VCC = 1.65 V) IOH/IOL = ±2 mA (min) (VCC = 1.4.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
TC74VCX2125FK Low-Voltage Quad Bus Buffer Toshiba Semiconductor
TC74VCX2573FK Low-Voltage Octal D-Type Latch Toshiba Semiconductor
TC74VCX2573FT Low-Voltage Octal D-Type Latch Toshiba Semiconductor
TC74VHC03F Quad 2-Input NAND Gate Toshiba Semiconductor
TC74VHC03FK Quad 2-Input NAND Gate Toshiba Semiconductor

Other Datasheets by Toshiba

Part Number Description
TC74VCX125FK Low-Voltage Quad Bus Buffer
TC74VCX138FK Low-Voltage 3-to-8 Line Decoder
TC74VCX138FT Low-Voltage 3-to-8 Line Decoder
TC74VCX14FK Low-Voltage Hex Schmitt Inverter
TC74VCX14FT Low-Voltage Hex Schmitt Inverter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CMOS Digital Integrated Circuits Silicon Monolithic TC74VCX125FT TC74VCX125FT 1. Functional Description • Low-Voltage Quad Bus Buffer with 3.6-V Tolerant Inputs and Outputs 2. General The TC74VCX125FT is a high-performance CMOS quad bus buffer which is guaranteed to operate from 1.2 V to 3.6 V. Designed for use in 1.5 V, 1.8 V, 2.5 V or 3.3 V systems, it achieves high-speed operation while maintaining the CMOS low power dissipation. It is also designed with overvoltage tolerant inputs and outputs up to 3.6 V. This device requires the 3-state control input OE to be set high to place the output into the high impedance state. All inputs are equipped with protection circuits against static discharge. 3.