CL8801 driver equivalent, sequential linear led driver.
*
* Minimal component count (base config: CL8801 + 4 resistors + diode bridge)
*
* No magnetics, no capacitors
*
* Up to 7.5W output (13W w/ heat s.
*
* Fluorescent tube retrofit
*
* Incandescent & CFL bulb replacement
*
* General LED lighting
Gen.
The CL8801 is designed to drive a long string of inexpensive, low current LEDs directly from the AC mains. A basic driver circuit consists of the CL8801, four resistors, and a bridge rectifier. Two to four additional components are optional for vario.
Image gallery
TAGS
Download (Size : 318.72KB)