Download the CL8800K63-G datasheet PDF.
This datasheet also covers the CL8800 variant, as both devices belong to the same sequential linear led driver family and are provided as variant models within a single manufacturer datasheet.
General Description
The CL8800 is designed to drive a long string of inexpensive, low current LEDs directly from the AC mains.
A basic driver circuit consists of the CL8800, six resistors, and a bridge rectifier.
Two to four additional components are optional for various levels of transient protection.
Full PDF Text Transcription for CL8800K63-G (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
CL8800K63-G. For precise diagrams, and layout, please refer to the original PDF.
Supertex inc. CL8800 Sequential Linear LED Driver Features ►► Minimal component count (base config: CL8800 + 6 resistors + diode bridge) ►► No magnetics, no capacitors ►►...
View more extracted text
CL8800 + 6 resistors + diode bridge) ►► No magnetics, no capacitors ►► Up to 7.5W output (13W w/ heat sink) ►► >110Lm/W using efficient LEDs ►► 85% typical electrical efficiency ►► >0.95 power factor ►► <20% THD line current ►► Low conducted EMI w/o filters ►► 85% LED luminous utilization ►► Phase dimmer compatible with an RC network Applications ►► Fluorescent tube retrofit ►► Incandescent & CFL bulb replacement ►► General LED lighting General Description The CL8800 is designed to drive a long string of inexpensive, low current LEDs directly from the AC mains. A basic driver circuit consists of the CL8800, six resistors,
CL8800K63-G Datasheet
