Datasheet4U Logo Datasheet4U.com

SC74HC595D - 8BIT SHIFT REGISTER

Download the SC74HC595D datasheet PDF. This datasheet also covers the SC74HC595 variant, as both devices belong to the same 8bit shift register family and are provided as variant models within a single manufacturer datasheet.

General Description

8-bit shift register with serial input, serial/parallel output and 8bit tri-state output flip-latch.

Key Features

  • SSOP-16-300-0.65 high noise immunity. The register and flip-latch both have separate clock inputs (SCK and RCK). The serial input data (IS) is stored into register at the rising edge of SCK; the data of register is stored into flip-latch at the rising edge of RCK. The low level of clear DIP-16-300-2.54 TSSOP-16-225-0.65 port ( SCLR ) only reset the register, and is no effect to flip- latch. When the control enable ( G.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (SC74HC595_SilanMicroelectronics.pdf) that lists specifications for multiple related part numbers.

Datasheet Details

Part number SC74HC595D
Manufacturer Silan Microelectronics
File Size 301.42 KB
Description 8BIT SHIFT REGISTER
Datasheet download datasheet SC74HC595D Datasheet

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SC74HC595 8-BIT SHIFT REGISTER (SERIAL INPUT, 3S PARALLEL OUTPUT WITH LATCHES) DESCRIPTION SC74HC595 utilizes advanced CMOS technology, and has 8-bit shift register with serial input, serial/parallel output and 8bit tri-state output flip-latch. The pin configuration is in accord SOP-16-300-1.27 SOP-16-225-1.27 with the 54LS/74LS series, and the operating speed is similar to 54LS/74LS. This circuit has the protecting circuit for all the inputs and outputs to avoid the damage caused by the static discharge. And it has the ability of driving load and features SSOP-16-300-0.65 high noise immunity. The register and flip-latch both have separate clock inputs (SCK and RCK).