Datasheet4U Logo Datasheet4U.com

LC5581AS - 1 Converter High Power Factor LED Driver ICs

Datasheet Summary

Description

The LC5581AS and LC5581LS are quasi-resonant LED driver ICs.

The ICs can also operate in PWM mode.

The ICs support isolated and non-isolated buck circuits and buck-boost converters.

Features

  • the ICs can provide more costeffective power supply systems with fewer external components. Features.
  • 800 V High Voltage Built-in Startup Circuit.
  • Analog Dimming Function.
  • High Power Factor by Average Current Control.
  • Soft Start Function.
  • Shorter Time from Startup to LED Lighting.
  • COMP Pin Fast Charging Function.
  • Bias Assist Function that Includes Two Types that are Activated at Different Voltage Levels (Smaller Capacitance of the VCC Pin).
  • Standb.

📥 Download Datasheet

Datasheet preview – LC5581AS

Datasheet Details

Part number LC5581AS
Manufacturer Sanken
File Size 737.39 KB
Description 1 Converter High Power Factor LED Driver ICs
Datasheet download datasheet LC5581AS Datasheet
Additional preview pages of the LC5581AS datasheet.

📁 Similar Datasheet

Other Datasheets by Sanken
  • LC5581LS - 1 Converter High Power Factor LED Driver ICs
  • LC5523D - Single-Stage Power Factor Corrected Off-Line Switching Regulator IC
  • LC5525F - power IC for the LED driver
  • LC5545LD - LED Driver
  • LC5546AD - LED Driver IC
  • LC5546LD - LED Driver IC
  • LC5550LD - Single-Stage Power Factor Corrected High Efficiency Non-Isolated Buck LED Driver
  • LC5555LD - Single-Stage Power Factor Corrected High Efficiency Non-Isolated Buck LED Driver

Full PDF Text Transcription

Click to expand full text
1 Converter High Power Factor LED Driver ICs LC5581AS/LS Data Sheet Description Package The LC5581AS and LC5581LS are quasi-resonant LED driver ICs. The ICs can also operate in PWM mode. The ICs support isolated and non-isolated buck circuits and buck-boost converters. The ICs provide the systems that can comply with the harmonics standard (IEC61000-3-2 Class C) in all conditions, including a light load condition. These systems, moreover, can be achieved by 1 converter system that requires no input electrolytic capacitor. The ICs employ the average current and quasi-resonant controls: the average current control realizes high power factors, whereas the quasi-resonant control contributes to high efficiency and low noise.
Published: |