RIC7113L4 Datasheet | International Rectifier

Features n Total dose capability to 100K Rad (Si) n Floating channel designed for bootstrap operation n Fully operational to +400V n Tolerant to negative transient voltage n d V/dt immune n Gate drive supply range from 10 to 20V n Undervoltage lockout for both channels n Separate logic supply range from 5 to 20V Logic and power ground ±5V offset n CMOS Schmitt-triggered inputs with pull-down n Cycle by cycle edge-triggered shutdown logic n Matched propagation delay for both channels n Outputs in phase with inputs Product Summary VOFFSET IO+/VOUT ton/off (typ.) Delay Matching(typ.) 400V max. 2A / 2A 10 - 20V 120 & 100 ns 5 ns Description The RIC7113L4 is a high voltage, high speed power MOSFET and IGBT driver with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. Logic inputs are patible with standard CMOS or LSTTL outputs. The output drivers feature n Hermetically Sealed a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched n Lightweight to simplify use in high frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 400 volts. Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to . The Thermal Resistance and Power Dissipation ratings are measured under board mounted and still air Absolute Maximum Ratings conditions. Symbol VB VS VHO VCC VLO VDD VSS VIN d Vs/dt PD Rth JA TJ TS TL Parameter High Side Floating Supply Voltage High Side Floating Supply Offset Voltage High Side Floating Output Voltage Low Side Fixed Supply Voltage Low Side Output Voltage Logic Supply Voltage Logic Supply Offset Voltage Logic Input Voltage (HIN, LIN & SD) Allowable Offset Supply Voltage Transient (Figure 2) Package Power Dissipation @...