Datasheet4U Logo Datasheet4U.com

IR3506 - DDR & VTT PHASE

Description

The IR3506 Phase IC combined with IR3522 xPHASE3 Control ICs implements a full featured DDR3 power solution.

Features

  • Power State Indicator (PSI) interface provides the capability to maximize efficiency at light loads Anti-bias circuitry 7V/2A gate drivers (4A GATEL sink current) Support loss-less inductor current sensing Phase delay DFF bypassed during PSI assertion mode to improve output ripple performance Over-current protection during PSI assertion m.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
IR350 Receiver Pre-amp Module ETC
IR35215 dual output digital multi-phase controller Infineon
IR300N-D0 Infrared Emitter CT Micro
IR304C-AXXXX Infrared LED Lamp Xinqiao Optoelectronic
IR311 REFLECTIVE NON FOCUSING SENSOR Fairchild Semiconductor

Other Datasheets by International Rectifier (now Infineon)

Part Number Description
IR3500 VR11.0 & AMD PVID CONTROLLER
IR3502 CONTROLLER
IR3505 PHASE
IR3507 PHASE
IR3510 Hot-Swap N+1 Redundant XPhase Controller

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
IR3506 DATA SHEET XPHASE3TM DDR & VTT PHASE IC DESCRIPTION The IR3506 Phase IC combined with IR3522 xPHASE3 Control ICs implements a full featured DDR3 power solution. The IR3522 provides control functions for both the VDDR and VTT power rails and interfaces with any number of IR3506 Phase ICs each driving and monitoring a single phase to power any number of DDR3 TM DIMMs. The xPHASE3 architecture delivers a power supply that is smaller, more flexible, and easier to design while providing higher efficiency than conventional approaches.