Datasheet4U Logo Datasheet4U.com

74ALVCH16373 - Low Voltage 16-Bit Transparent Latch

General Description

The ALVCH16373 contains sixteen non-inverting latches with 3-STATE outputs and is intended for bus oriented applications.

The device is byte controlled.

The flip-flops appear to be transparent to the data when the Latch Enable (LE) is HIGH.

Key Features

  • s 1.65V to 3.6V VCC supply operation s 3.6V tolerant control inputs and outputs s Bushold on data inputs eliminates the need for external pull-up/pull-down resistors s tPD (In to On) 3.6 ns max for 3.0V to 3.6V VCC 4.5 ns max for 2.3V to 2.7V VCC 6.8 ns max for 1.65V to 1.95V VCC s Uses patented noise/EMI reduction circuitry s Latch-up conforms to JEDEC JED78 s ESD performance: Human body model > 2000V Machine model > 200V Ordering Code: Order Number 74ALVCH16373T Package Number MTD48 Package D.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74ALVCH16373 2.5V/3.3V 16-bit D-type transparent latch NXP
74ALVCH16373 16-bit D-type transparent latch nexperia
74ALVCH16374 LOW VOLTAGE CMOS 16-BIT D-TYPE FLIP-FLOP STMicroelectronics
74ALVCH16374 16-bit edge-triggered D-type flip-flop nexperia
74ALVCH16374 16-bit edge-triggered D-type flip-flop NXP

Other Datasheets by Fairchild (onsemi)

Part Number Description
74ALVCH16374 Low Voltage 16-Bit D-Type Flip-Flop
74ALVCH162240 Low Voltage 16-Bit Inverting Buffer/Line Driver
74ALVCH162244 Low Voltage 16-Bit Buffer/Line Driver
74ALVCH162373 Low Voltage 16-Bit Transparent Latch
74ALVCH162374 Low Voltage 16-Bit D-Type Flip-Flop

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74ALVCH16373 Low Voltage 16-Bit Transparent Latch with Bushold October 2001 Revised February 2002 74ALVCH16373 Low Voltage 16-Bit Transparent Latch with Bushold General Description The ALVCH16373 contains sixteen non-inverting latches with 3-STATE outputs and is intended for bus oriented applications. The device is byte controlled. The flip-flops appear to be transparent to the data when the Latch Enable (LE) is HIGH. When LE is LOW, the data that meets the setup time is latched. Data appears on the bus when the Output Enable (OE) is LOW. When OE is HIGH, the outputs are in a high impedance state. The ALVCH16373 data inputs include active bushold circuitry, eliminating the need for external pull-up resistors to hold unused or floating data inputs at a valid logic level.