EN25S80
FEATURES
- Single power supply operation
- Full voltage range: 1.65-1.95 volt
- Serial Interface Architecture
- SPI patible: Mode 0 and Mode 3
- 8 M-bit Serial Flash
- 8 M-bit/1024 K-byte/4096 pages
- 256 bytes per programmable page
- Standard or Dual SPI
- Standard SPI: CLK, CS#, DI, DO, WP#, HOLD#
- Dual SPI: CLK, CS#, DQ0, DQ1, WP#, HOLD#
- High performance
- 75MHz clock rate for one data bit
- 50MHz clock rate for two data bits
- Low power consumption
- 7 m A typical active current
- 1 μA typical power down current
- Uniform Sector Architecture: 256 sectors of 4-Kbyte 16 blocks of 64-Kbyte Any sector or block can be erased individually
- Software and Hardware Write Protection:
- Write Protect all or portion of memory via software
- Enable/Disable protection with WP# pin
- High performance program/erase speed Page program time: 1.3ms typical Sector erase time: 90ms typical Block erase time 500ms typical Chip erase time: 5 Seconds typical
- Lockable 256 byte OTP security sector
-...
