Datasheet4U Logo Datasheet4U.com

74ALVCH16244 - 16-bit buffer/line driver

Download the 74ALVCH16244 datasheet PDF. This datasheet also covers the 74ALVC16244 variant, as both devices belong to the same 16-bit buffer/line driver family and are provided as variant models within a single manufacturer datasheet.

Description

The 74ALVC16244; 74ALVCH16244 is a 16-bit buffer/line driver with 3-state outputs.

The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer.

Features

  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low power consumption.
  • MultiByte flow-through standard pin-out architecture.
  • Low inductance multiple VCC and GND pins for minimum noise and ground bounce.
  • Overvoltage tolerant inputs to 5.5 V.
  • Direct interface with TTL levels.
  • IOFF circuitry provides partial Power-down mode operation.
  • All data inputs have bushold (74ALVCH16244 only).
  • Latch-up performance exceeds 1.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (74ALVC16244-nexperia.pdf) that lists specifications for multiple related part numbers.

📁 Similar Datasheet

Part Number Description Manufacturer
74ALVCH16244 Low Voltage 16-Bit Buffer/Line Driver Fairchild Semiconductor
74ALVCH16244 2.5V/3.3V 16-bit buffer/line driver NXP
74ALVCH16244 LOW VOLTAGE CMOS 16-BIT BUS BUFFER STMicroelectronics
74ALVCH16244 Low-Voltage 16-Bit Buffer ON Semiconductor
74ALVCH16240 Low Voltage 16-Bit Inverting Buffer/Line Driver Fairchild Semiconductor

Other Datasheets by nexperia

Part Number Description
74ALVCH16245 16-bit transceiver
74ALVCH162244 16-bit buffer/line driver
74ALVCH162244DGG 16-bit buffer/line driver
74ALVCH162245 16-bit bus transceiver
74ALVCH162601 18-bit universal bus transceiver

Full PDF Text Transcription

Click to expand full text
74ALVC16244; 74ALVCH16244 2.5 V / 3.3 V 16-bit buffer/line driver; 3-state Rev. 6 — 22 July 2021 Product data sheet 1. General description The 74ALVC16244; 74ALVCH16244 is a 16-bit buffer/line driver with 3-state outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The device features four output enables (1OE, 2OE, 3OE and 4OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.
Published: |