Datasheet4U Logo Datasheet4U.com

TPS563240 - 3-A 1.4-MHz Synchronous Step-Down Voltage Regulator

General Description

The TPS563240 is a simple, easy-to-use, 3-A synchronous step-down regulator in SOT-23 package.

The peak transient output current can be 3.5 A.

The devices are optimized to operate with minimum external component counts and also optimized to achieve low standby current.

Key Features

  • 1 3-A converter integrated 70-mΩ and 30-mΩ FETs, support 3.5-A transient.
  • D-CAP3™ mode control with fast transient response.
  • Input voltage range: 4.5 V to 17 V.
  • Output voltage range: 0.6 V to 7 V.
  • Pulse-skip mode during light load operation without going below 25-kHz switching frequency.
  • 1.4-MHz switching frequency.
  • Low shutdown current less than 10 µA.
  • 1% feedback voltage accuracy (25 ºC).
  • Startup from pre-biased o.

📥 Download Datasheet

Other Datasheets by Texas Instruments

Part Number Description
TPS563200 Synchronous Step-Down Voltage Regulator
TPS563201 3-A Synchronous Step-Down Voltage Regulator
TPS563202 3-A Synchronous Buck Converter
TPS563208 3-A Synchronous Step-Down Voltage Regulator
TPS563209 Synchronous Step-Down Voltage Regulator
TPS563210 Synchronous Step-Down Voltage Regulator
TPS563219 Synchronous Step-Down Voltage Regulator
TPS563231 3-A Synchronous Step-Down Voltage Regulator
TPS56300 Dual Output Low-Input-Voltage DSP Power Supply Controller
TPS56302 DUAL-OUTPUT LOW-INPUT-VOLTAGE DSP POWER SUPPLY CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Product Folder Order Now Technical Documents Tools & Software Support & Community TPS563240 SLVSE74A – DECEMBER 2018 – REVISED AUGUST 2019 TPS563240 17-V, 3-A 1.4-MHz Synchronous Step-Down Voltage Regulator 1 Features •1 3-A converter integrated 70-mΩ and 30-mΩ FETs, support 3.5-A transient • D-CAP3™ mode control with fast transient response • Input voltage range: 4.5 V to 17 V • Output voltage range: 0.6 V to 7 V • Pulse-skip mode during light load operation without going below 25-kHz switching frequency • 1.4-MHz switching frequency • Low shutdown current less than 10 µA • 1% feedback voltage accuracy (25 ºC) • Startup from pre-biased output voltage • Cycle-by-cycle overcurrent limit • Hiccup-mode overcurrent protection • Non-latch UVP and TSD protections • Fixed soft start: 1.