Datasheet4U Logo Datasheet4U.com

TL5632C - 8-BIT 3-CHANNEL HIGH-SPEED DIGITAL-TO-ANALOG CONVERTER

General Description

The TL5632C is a low-power ultra-high-speed video digital-to-analog converter that uses the Advanced Low-Power Schottky (ALS) process.

The device has a three channel I/O; the red, the blue, and the green channel.

The red, blue, and green signals are referred to collectively as the RGB signal.

📥 Download Datasheet

Datasheet Details

Part number TL5632C
Manufacturer Texas Instruments
File Size 134.41 KB
Description 8-BIT 3-CHANNEL HIGH-SPEED DIGITAL-TO-ANALOG CONVERTER
Datasheet download datasheet TL5632C Datasheet

Other Datasheets by Texas Instruments

Part Number Description
TL5001 PULSE-WIDTH-MODULATION CONTROLLER
TL5001A PULSE-WIDTH-MODULATION CONTROLLER
TL5001A-Q1 PULSE-WIDTH-MODULATION CONTROLLER
TL5002 Pulse-Width-Modulation Controller
TL507C Analog-to-Digital Converter
TL507I Analog-to-Digital Converter
TL52055 3-CIRCUIT VIDEO SWITCH
TL5209 500-mA Low-Noise Low-Dropout Voltage Regulator
TL5580 DUAL LOW-NOISE WIDE-BANDWIDTH PRECISION AMPLIFIER
TL5580A DUAL LOW-NOISE WIDE-BANDWIDTH PRECISION AMPLIFIER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TL5632C 8-BIT 3-CHANNEL HIGH-SPEED DIGITAL-TO-ANALOG CONVERTER D 8-Bit Resolution D Linearity . . . ± 1/2 LSB Maximum D Differential Nonlinearity . . . ± 1/2 LSB Maximum D Conversion Rate . . . 60 MHz Min D Nominal Output Signal Operating Range VCC to VCC – 1 V D TTL Digital Input Voltage D 5-V Single Power Supply Operation D Low Power Consumption . . . 350 mW Typ description The TL5632C is a low-power ultra-high-speed video digital-to-analog converter that uses the Advanced Low-Power Schottky (ALS) process. The device has a three channel I/O; the red, the blue, and the green channel. The red, blue, and green signals are referred to collectively as the RGB signal. An internally generated reference is also provided for the standard video output voltage range.