Datasheet4U Logo Datasheet4U.com

TL507I - Analog-to-Digital Converter

Download the TL507I datasheet PDF. This datasheet also covers the TL507C variant, as both devices belong to the same analog-to-digital converter family and are provided as variant models within a single manufacturer datasheet.

General Description

The TL507 is a low-cost single-slope analog-todigital converter designed to convert analog inputvoltages between 0.25 VCC1 and 0.75 VCC1 into a pulse-width-modulated output code.

📥 Download Datasheet

Note: The manufacturer provides a single datasheet file (TL507C-etcTI.pdf) that lists specifications for multiple related part numbers.

Other Datasheets by Texas Instruments

Part Number Description
TL507C Analog-to-Digital Converter
TL5001 PULSE-WIDTH-MODULATION CONTROLLER
TL5001A PULSE-WIDTH-MODULATION CONTROLLER
TL5001A-Q1 PULSE-WIDTH-MODULATION CONTROLLER
TL5002 Pulse-Width-Modulation Controller
TL52055 3-CIRCUIT VIDEO SWITCH
TL5209 500-mA Low-Noise Low-Dropout Voltage Regulator
TL5580 DUAL LOW-NOISE WIDE-BANDWIDTH PRECISION AMPLIFIER
TL5580A DUAL LOW-NOISE WIDE-BANDWIDTH PRECISION AMPLIFIER
TL5632C 8-BIT 3-CHANNEL HIGH-SPEED DIGITAL-TO-ANALOG CONVERTER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
TL507C, TL507l ANALOGĆTOĆDIGITAL CONVERTER SLAS041 − OCTOBER 1979 − REVISED OCTOBER 1988 D Low Cost D 7-Bit Resolution D Montonicity Over Entire A/D Conversion Range D Ratiometric Conversion D Conversion Speed . . . Approximately 1 ms D Single-Supply Operation . . . Either Unregulated 8-V to 18-V (VCC2 Input) or Regulated 3.5-V to 6-V (VCC1 Input) D I2L Technology D Power Consumption at 5 V . . . 25 mW Typ D Regulated 5.5-V Output (≤1 mA) description The TL507 is a low-cost single-slope analog-todigital converter designed to convert analog inputvoltages between 0.25 VCC1 and 0.75 VCC1 into a pulse-width-modulated output code.