Datasheet4U Logo Datasheet4U.com

SN74LVTH374-EP - 3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP

Description

This octal flip-flop is designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The eight flip-flops of the SN74LVTH374 are edge-triggered D-type flip-flops.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVTH374 3.3-V ABT OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOP
SN74LVTH373 3.3-V ABT OCTAL TRANSPARENT D-TYPE LATCHES
SN74LVTH373-EP 3.3-V ABT OCTAL TRANSPARENT D-TYPE LATCH
SN74LVTH322374 3.3-V ABT 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP
SN74LVTH32244 3.3-V ABT 32-BIT BUFFER/DRIVER

Full PDF Text Transcription

Click to expand full text
SN74LVTH374ĆEP 3.3ĆV ABT OCTAL EDGEĆTRIGGERED DĆTYPE FLIPĆFLOP WITH 3ĆSTATE OUTPUTS SCBS771 − NOVEMBER 2003 D Controlled Baseline − One Assembly/Test Site, One Fabrication Site D Enhanced Diminishing Manufacturing Sources (DMS) Support D Enhanced Product-Change Notification D Qualification Pedigree† D Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC) D Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C D Supports Unregulated Battery Operation Down to 2.7 V D Ioff and Power-Up 3-State Support Hot Insertion † Component qualification in accordance with JEDEC and industry standards to ensure reliable operation over an extended temperature range.
Published: |