Datasheet4U Logo Datasheet4U.com

SN74LVCH244A - OCTAL BUFFERS/DRIVERS

Description

The SN54LVCH244A octal buffer/line driver is designed for 2.7-V to 3.6-V VCC operation, and the SN74LVCH244A octal buffer/line driver is designed for 1.65-V to 3.6-V VCC operation.

These devices are organized as two 4-bit line drivers with separate output-enable (OE) inputs.

Features

  • Operate From 1.65 V to 3.6 V.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 5.9 ns at 3.3 V.
  • Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C.
  • Support Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC).
  • Ioff Supports Partial-Power-Down Mode Operation.
  • Bus Hold on Data Inputs Eliminates the Need for Extern.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVCH245A Octal Bus Transceivers
SN74LVCH245A-Q1 OCTAL BUS TRANSCEIVER
SN74LVCH162244A 16-Bit Buffer/Driver
SN74LVCH16240A 16-BIT BUFFER/DRIVER
SN74LVCH16244A 16-Bit Buffer/Driver

Full PDF Text Transcription

Click to expand full text
www.ti.com SN54LVCH244A, SN74LVCH244A OCTAL BUFFERS/DRIVERS WITH 3-STATE OUTPUTS SCES009O – JULY 1995 – REVISED FEBRUARY 2007 FEATURES • Operate From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 5.9 ns at 3.3 V • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C • Support Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.
Published: |