Datasheet4U Logo Datasheet4U.com

SN74LVC823A - 10-BIT BUS-INTERFACE FLIP-FLOP

Description

This 9-bit bus-interface flip-flop is designed for 1.65-V to 3.6-V VCC operation.

The SN74LVC823A is designed specifically for driving highly capacitive or relatively low-impedance loads.

Features

  • Operates From 1.65 V to 3.6 V.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 7.9 ns at 3.3 V.
  • Typical VOLP (Output Ground Bounce) 2 V at VCC = 3.3 V, TA = 25°C.
  • Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC).
  • Ioff Supports Partial-Power-Down Mode Operation.
  • Latch-Up Performance Exceeds 250 mA Per JESD 17.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC821A 10-BIT BUS-INTERFACE FLIP-FLOP
SN74LVC827A 10-Bit Buffer/Driver
SN74LVC828A 10-Bit Buffer/Driver
SN74LVC841A 10-BIT BUS-INTERFACE D-TYPE LATCH
SN74LVC861A 10-Bit Bus Transceiver

Full PDF Text Transcription

Click to expand full text
www.ti.com FEATURES • Operates From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 7.9 ns at 3.3 V • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C • Supports Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.
Published: |