Datasheet4U Logo Datasheet4U.com

SN74LVC573A - Octal Transparent D-Type Latches

Description

The SN54LVC573A octal transparent D-type latch is designed for 2.7-V to 3.6-V VCC operation, and the SN74LVC573A octal transparent D-type latch is designed for 1.65-V to 3.6-V VCC operation.

Features

  • 1 Operate From 1.65 V to 3.6 V.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 6.9 ns at 3.3 V.
  • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C.
  • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C.
  • Support Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.3-V VCC).
  • Ioff Supports Live Insertion, Partial Power Down Mode, and Back Drive Protection.
  • Latch-Up Performance.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC573A-EP OCTAL TRANSPARENT D-TYPE LATCH
SN74LVC573A-Q1 OCTAL TRANSPARENT D-TYPE LATCH
SN74LVC574A OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN74LVC574A-EP OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS
SN74LVC574A-Q1 OCTAL EDGE-TRIGGERED D-TYPE FLIP-FLOPS

Full PDF Text Transcription

Click to expand full text
Product Folder Sample & Buy Technical Documents Tools & Software Support & Community SN54LVC573A, SN74LVC573A SCAS300S – JANUARY 1993 – REVISED MAY 2014 SNx4LVC573A Octal Transparent D-Type Latches With 3-State Outputs 1 Features •1 Operate From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 6.9 ns at 3.3 V • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C • Support Mixed-Mode Signal Operation on All Ports (5-V Input/Output Voltage With 3.
Published: |