Datasheet4U Logo Datasheet4U.com

SN74LVC32374A - 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP

Description

This 32-bit edge-triggered D-type flip-flop is designed for 1.65-V to 3.6-V VCC operation.

The SN74LVC32374A is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

Features

  • Member of the Texas Instruments Widebus™ Family.
  • Operates From 1.65 V to 3.6 V.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 4.5 ns at 3.3 V.
  • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C.
  • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C SN74LVC32374A 32-BIT EDGE-.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC32373A 32-BIT TRANSPARENT D-TYPE LATCH
SN74LVC32244 32-BIT BUFFER/DRIVER
SN74LVC32245 32-BIT BUS TRANSCEIVER
SN74LVC32A Quadruple 2-Input Positive-OR Gates
SN74LVC32A-EP QUADRUPLE 2-INPUT POSITIVE-OR GATE

Full PDF Text Transcription

Click to expand full text
www.ti.com FEATURES • Member of the Texas Instruments Widebus™ Family • Operates From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 4.5 ns at 3.3 V • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C SN74LVC32374A 32-BIT EDGE-TRIGGERED D-TYPE FLIP-FLOP WITH 3-STATE OUTPUTS SCES407A – JULY 2002 – REVISED MARCH 2005 • Ioff Supports Partial-Power-Down Mode Operation • Supports Mixed-Mode Signal Operation on All Ports (5-V Input and Output Voltages With 3.
Published: |