Datasheet4U Logo Datasheet4U.com

SN74LVC1T45 - Single-Bit Dual-Supply Bus Transceiver

Description

This single-bit noninverting bus transceiver uses two separate configurable power-supply rails.

The A port is designed to track VCCA.

VCCA accepts any supply voltage from 1.65 V to 5.5 V.

Features

  • ESD protection exceeds JESD 22.
  • 2000-V Human-Body Model (A114-A).
  • 200-V Machine Model (A115-A).
  • 1000-V Charged-Device Model (C101).
  • Available in the Texas Instruments NanoFree™ package.
  • Fully configurable dual-rail design allows each port to operate over the full 1.65-V to 5.5-V powersupply range.
  • VCC isolation feature.
  • if either VCC input is at GND, both ports are in the high-impedance state.
  • DIR input circuit ref.

📥 Download Datasheet

Full PDF Text Transcription

Click to expand full text
SN74LVC1T45 SCES515M – DECEMBER 2003 – REVISED NOVEMBER 2022 SN74LVC1T45 Single-Bit Dual-Supply Bus Transceiver With Configurable Voltage Translation and 3-State Outputs 1 Features • ESD protection exceeds JESD 22 – 2000-V Human-Body Model (A114-A) – 200-V Machine Model (A115-A) – 1000-V Charged-Device Model (C101) • Available in the Texas Instruments NanoFree™ package • Fully configurable dual-rail design allows each port to operate over the full 1.65-V to 5.5-V powersupply range • VCC isolation feature – if either VCC input is at GND, both ports are in the high-impedance state • DIR input circuit referenced to VCCA • Low power consumption, 4-µA maximum ICC • ±24-mA output drive at 3.3 V • Ioff supports partial-power-down mode operation • Maximum data rates – 420 Mbps (3.
Published: |