Datasheet4U Logo Datasheet4U.com

SN74LVC16374 - 16-Bit Edge-Triggered D-Type Flip-Flop

Description

This 16-bit edge-triggered D-type flip-flop is designed for 2.7-V to 3.6-V VCC operation.

The SN74LVC16374 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

It can be used as two 8-bit flip-flops or one 16-bit flip-flop.

Features

  • Member of the Texas Instruments Widebus™ Family.
  • EPIC™ (Enhanced-Performance Implanted CMOS) Submicron Process.
  • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C.
  • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C.
  • Latch-Up Performance Exceeds 250 mA Per JEDEC Standard JESD-17.
  • Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors.
  • Package Options Include Plastic 300.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC16374A 16-Bit Edge-Triggered D-Type Flip-Flop
SN74LVC16373 16-Bit Transparent D-Type Latch
SN74LVC16373A 16-Bit Transparent D-Type Latch
SN74LVC16373A-EP 16-Bit Transparent D-Type Latch
SN74LVC161284 19-BIT BUS INTERFACE

Full PDF Text Transcription

Click to expand full text
www.ti.com FEATURES • Member of the Texas Instruments Widebus™ Family • EPIC™ (Enhanced-Performance Implanted CMOS) Submicron Process • Typical VOLP (Output Ground Bounce) < 0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) > 2 V at VCC = 3.3 V, TA = 25°C • Latch-Up Performance Exceeds 250 mA Per JEDEC Standard JESD-17 • Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors • Package Options Include Plastic 300-mil Shrink Small-Outline (DL) and Thin Shrink Small-Outline (DGG) Packages DESCRIPTION This 16-bit edge-triggered D-type flip-flop is designed for 2.7-V to 3.6-V VCC operation. The SN74LVC16374 is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
Published: |