Datasheet4U Logo Datasheet4U.com

SN74LVC16244A-EP - 16-Bit Buffer/Driver

Description

This 16-bit buffer/driver is designed for 1.65-V to 3.6-V VCC operation.

The SN74LVC16244A is designed specifically to improve the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.

40°C to 85°C OR

Features

  • Controlled Baseline.
  • One Assembly/Test Site, One Fabrication Site.
  • Enhanced Diminishing Manufacturing Sources (DMS) Support.
  • Enhanced Product-Change Notification.
  • Qualification Pedigree (1).
  • Member of the Texas Instruments Widebus™ Family.
  • Operates From 1.65 V to 3.6 V.
  • Inputs Accept Voltages to 5.5 V.
  • Max tpd of 4.1 ns at 3.3 V.
  • Typical VOLP (Output Ground Bounce).

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SN74LVC1G125 high performance non-inverting buffer UMW
SN74LVC1G34 Single buffer UMW
SN74L71 AND-Gate R-S Master-Slave F-F National Semiconductor
SN74L74N Dual D-Type Flip-Flop ETC
SN74LS00 QUAD 2-INPUT NAND GATE Motorola

Other Datasheets by Texas Instruments

Part Number Description
SN74LVC16244A-Q1 16-Bit Buffer/Driver
SN74LVC16244A 16-Bit Buffer/Driver
SN74LVC16245A 16-Bit Bus Transceiver
SN74LVC162244A 16-Bit Buffer/Driver
SN74LVC161284 19-BIT BUS INTERFACE

Full PDF Text Transcription

Click to expand full text
www.ti.com FEATURES • Controlled Baseline – One Assembly/Test Site, One Fabrication Site • Enhanced Diminishing Manufacturing Sources (DMS) Support • Enhanced Product-Change Notification • Qualification Pedigree (1) • Member of the Texas Instruments Widebus™ Family • Operates From 1.65 V to 3.6 V • Inputs Accept Voltages to 5.5 V • Max tpd of 4.1 ns at 3.3 V • Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C • Typical VOHV (Output VOH Undershoot) >2 V at VCC = 3.3 V, TA = 25°C • Ioff Supports Partial-Power-Down Mode Operation • Supports Mixed-Mode Signal Operation On All Ports (5-V Input/Output Voltage With 3.
Published: |