Datasheet4U Logo Datasheet4U.com

SN65MLVD204B - Multipoint-LVDS Line Drivers and Receivers

General Description

receivers which are optimized to operate at signaling rates up to 100 Mbps.

Key Features

  • Compatible with the M-LVDS Standard TIA/ EIA-899 for Multipoint Data Interchange.
  • Low-Voltage Differential 30-Ω to 55-Ω Line Drivers and Receivers for Signaling Rates(1) Up to 100 Mbps, Clock Frequencies up to 50 MHz.
  • Type-2 Receiver Provides an Offset Threshold to Detect Open-Circuit and Idle-Bus Conditions.
  • Bus I/O Protection.
  • >±8-kV HBM.
  • >±8-kV IEC 61000-4-2 Contact Discharge.
  • Controlled Driver Output Voltage Transition Times for.

📥 Download Datasheet

Other Datasheets by Texas Instruments

Part Number Description
SN65MLVD204 MULTIPOINT-LVDS LINE DRIVERS AND RECEIVERS
SN65MLVD204A Multipoint-LVDS Line Driver and Receiver
SN65MLVD200 MULTIPOINT-LVDS LINE DRIVERS AND RECEIVERS
SN65MLVD200A Multipoint-LVDS Line Driver and Receiver
SN65MLVD200B Multipoint-LVDS Line Drivers and Receivers
SN65MLVD201 MULTIPOINT-LVDS LINE DRIVER AND RECEIVER
SN65MLVD202 MULTIPOINT-LVDS LINE DRIVERS AND RECEIVERS
SN65MLVD202A Multipoint-LVDS Line Driver and Receiver
SN65MLVD202B Multipoint-LVDS Line Drivers and Receivers
SN65MLVD203 MULTIPOINT-LVDS LINE DRIVER AND RECEIVER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ADVANCE INFORMATION www.ti.com SN65MLVD204B SLLSEN0C – NOVEMBER 2015 – REVISESDNS6EP5TMELMVBDER202042B0 SLLSEN0C – NOVEMBER 2015 – REVISED SEPTEMBER 2020 SN65MLVD204B Multipoint-LVDS Line Drivers and Receivers (Transceivers) With IEC ESD Protection 1 Features • Compatible with the M-LVDS Standard TIA/ EIA-899 for Multipoint Data Interchange • Low-Voltage Differential 30-Ω to 55-Ω Line Drivers and Receivers for Signaling Rates(1) Up to 100 Mbps, Clock Frequencies up to 50 MHz – Type-2 Receiver Provides an Offset Threshold to Detect Open-Circuit and Idle-Bus Conditions • Bus I/O Protection – >±8-kV HBM – >±8-kV IEC 61000-4-2 Contact Discharge • Controlled Driver Output Voltage Transition Times for Improved Signal Quality • -1-V to 3.