Datasheet4U Logo Datasheet4U.com

SN65MLVD200 - MULTIPOINT-LVDS LINE DRIVERS AND RECEIVERS

General Description

This series of SN65MLVD20x devices are low-voltage differential line drivers and receivers complying with the proposed multipoint low-voltage differential signaling (M-LVDS) standard (TIA/EIA

899).

Key Features

  • to address multipoint.

📥 Download Datasheet

Other Datasheets by Texas Instruments

Part Number Description
SN65MLVD200A Multipoint-LVDS Line Driver and Receiver
SN65MLVD200B Multipoint-LVDS Line Drivers and Receivers
SN65MLVD201 MULTIPOINT-LVDS LINE DRIVER AND RECEIVER
SN65MLVD202 MULTIPOINT-LVDS LINE DRIVERS AND RECEIVERS
SN65MLVD202A Multipoint-LVDS Line Driver and Receiver
SN65MLVD202B Multipoint-LVDS Line Drivers and Receivers
SN65MLVD203 MULTIPOINT-LVDS LINE DRIVER AND RECEIVER
SN65MLVD204 MULTIPOINT-LVDS LINE DRIVERS AND RECEIVERS
SN65MLVD204A Multipoint-LVDS Line Driver and Receiver
SN65MLVD204B Multipoint-LVDS Line Drivers and Receivers

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
SN65MLVD200, SN65MLVD202 SN65MLVD204, SN65MLVD205 MULTIPOINT–LVDS LINE DRIVERS AND RECEIVERS SLLS463E – SEPTEMBER 2001 – REVISED JUNE 2003 D Low-Voltage Differential 30-Ω Line Drivers and Receivers for Signaling Rates† up to 100 Mbps D Power Dissipation at 100 Mbps – Driver: 50 mW Typical – Receiver: 30 mW Typical D Meets or Exceeds Current Revision of M-LVDS Standard TIA/EIA–899 for Multipoint Data Interchange D Controlled Driver Output Voltage Transition Times for Improved Signal Quality D –1-V to 3.4-V Common-Mode Voltage Range Allows Data Transfer With up to 2 V of Ground Noise D Type-1 Receivers Incorporate 25 mV of Hysteresis D Type-2 Receivers Provide an Offset (100 mV) Threshold to Detect Open-Circuit and Idle-Bus Conditions D Operates From a Single 3.