Using an innovative multistep conversion technique, the 12-bit ADC12662 CMOS analog-to-digital converter digitizes signals at a 1.5 MHz sampling rate while consuming a maximum of only 200 mW on a single +5V supply.
Key Features
1.
2 Built-In Sample-and-Hold.
Single +5V Supply.
Single Channel or 2 Channel Multiplexer
Operation.
Full PDF Text Transcription for ADC12662 (Reference)
Note: Below is a high-fidelity text extraction (approx. 800 characters) for
ADC12662. For precise diagrams, and layout, please refer to the original PDF.
OBSOLETE ADC12662 www.ti.com SNAS092C – JUNE 2004 – REVISED APRIL 2013 ADC12662 12-Bit, 1.5 MHz, 200 mW A/D Converter with Input Multiplexer and Sample/Hold Check for Sam...
View more extracted text
mW A/D Converter with Input Multiplexer and Sample/Hold Check for Samples: ADC12662 FEATURES 1 •2 Built-In Sample-and-Hold • Single +5V Supply • Single Channel or 2 Channel Multiplexer Operation • Low Power Standby Mode APPLICATIONS • Digital Signal Processor Front Ends • Instrumentation • Disk Drives • Mobile Telecommunications • Waveform Digitizers KEY SPECIFICATIONS • Sampling rate: 1.5 MHz (min) • Conversion time: 580 ns (typ) • Signal-to-Noise Ratio, fIN= 100 kHz: 67.5 dB (min) • Power consumption (fs= 1.
ADC12662 Datasheet
