Datasheet4U Logo Datasheet4U.com

VT73227-S1 - VCXO (Voltage-Controlled Crystal Oscillator) 27 MHz 3.3V

Description

The Vaishali VT73227 is a single-chip, low-jitter Voltage-Controlled-Crystal-Oscillator.

The device accepts a 27 MHz, 20 pF (pull range of 200 ppm) crystal input, and produces a low jitter output at the same frequency.

Features

  • =.
  • =.
  • = 3.3V operating voltage Uses inexpensive pullable crystal 12mA drive capability at TTL levels.
  • =.
  • = On-chip oscillator with 200 ppm pull range (±100 ppm) 8 pin SOIC package Figure 1. Functional Block Diagram VDD1 VDD2 VIN X2 27 MHz Pullable Crystal Load Cap Control Output Buffer Load Caps Oscillator CLK1 X1 GND1 GND2 2001-04-02 Vaishali Semiconductor 1300 White Oaks Road, Ste. 200 Page 1 Campbell CA 95008 Ph. 408.377.6060 MDST-0006-03.

📥 Download Datasheet

Datasheet Details

Part number VT73227-S1
Manufacturer Vaishali Semiconductor
File Size 67.10 KB
Description VCXO (Voltage-Controlled Crystal Oscillator) 27 MHz 3.3V
Datasheet download datasheet VT73227-S1 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
VT7-705-C SMD VC-TCXO QUARTZCOM the communications company
VT7202 1024 x 9 FIFO Memory VLSI
VT7203 2048 x 8 FIFO Memory VLSI
VT760 Trench MOS Barrier Schottky Rectifier Vishay
VT760-E3 Trench MOS Barrier Schottky Rectifier Vishay

Other Datasheets by Vaishali Semiconductor

Part Number Description
VT73227-S1X VCXO (Voltage-Controlled Crystal Oscillator) 27 MHz 3.3V
VT73227 VCXO (Voltage-Controlled Crystal Oscillator) 27 MHz 3.3V
VT73127 27 MHz 3.3V VCXO with Output Enable
VT73LVP10 TTL to Differential LVPECL Translator
VT73LVP10M TTL to Differential LVPECL Translator

Full PDF Text Transcription

Click to expand full text
VT73227 VCXO (Voltage-Controlled Crystal Oscillator) 27 MHz 3.3V Applications •= •= Set-top boxes Telecom switching •= •= Oscillator replacement MPEG Video clock source General Description The Vaishali VT73227 is a single-chip, low-jitter Voltage-Controlled-Crystal-Oscillator. The device accepts a 27 MHz, 20 pF (pull range of 200 ppm) crystal input, and produces a low jitter output at the same frequency. A 0 to 3.0V control signal is used to fine tune the output clock frequency in the ±100ppm range. Features •= •= •= 3.3V operating voltage Uses inexpensive pullable crystal 12mA drive capability at TTL levels •= •= On-chip oscillator with 200 ppm pull range (±100 ppm) 8 pin SOIC package Figure 1.
Published: |