Datasheet4U Logo Datasheet4U.com

XC8112 - 2ch Load switch

Datasheet Summary

Description

The XC8112/XC8113 series are 2ch load switch IC with ideal diode function.

These ICs perform regulation control to ensure that their VOUT pin voltage is a value of VIN - 20mV, so they can suppress heat generation to a greater extent than general diodes.

Features

  • nput Voltage Range Output Current Stand-by Current Quiescent Current Reverse Bias Current Forward Voltage Over current limit Short current 1.5V ~ 6.0V XC8112 : 2ch x 500mA (VIN > 1.7V) XC8113 : 2ch x1000mA (VIN >2.0V) 0.65μA/ch 3.6μA/ch 0.8μA/ch 20mV XC8112 : 850mA XC8113 : 1700mA 50mA.

📥 Download Datasheet

Datasheet preview – XC8112

Datasheet Details

Part number XC8112
Manufacturer Torex
File Size 2.14 MB
Description 2ch Load switch
Datasheet download datasheet XC8112 Datasheet
Additional preview pages of the XC8112 datasheet.

📁 Similar Datasheet

  • XC8112B - Step-Down Converter (ETC)
  • XC8101 - High Side Line Switch (Torex Semiconductor)
  • XC8102 - Load Switch (Torex Semiconductor)
  • XC8108 - High Function Power Switch (Torex Semiconductor)
  • XC8 - CompactPCI P1 (OMRON)
  • XC800 - Microcontroller Family Architecture and Instruction Set (Infineon Technologies AG)
  • XC822 - (XC822 / XC824) 8-Bit Single-Chip Microcontroller (Infineon Technologies)
  • XC824 - (XC822 / XC824) 8-Bit Single-Chip Microcontroller (Infineon Technologies)
  • XC835 - (XC835 / XC836) 8-Bit Single-Chip Microcontroller (Infineon Technologies)
  • XC836 - (XC835 / XC836) 8-Bit Single-Chip Microcontroller (Infineon Technologies)
Other Datasheets by Torex

Full PDF Text Transcription

Click to expand full text
XC8112/XC8113 Series 2ch Load switch IC with ideal diode function ETR33022-001 ■GENERAL DESCRIPTION The XC8112/XC8113 series are 2ch load switch IC with ideal diode function. These ICs perform regulation control to ensure that their VOUT pin voltage is a value of VIN - 20mV, so they can suppress heat generation to a greater extent than general diodes. When a voltage is applied at the VOUT pin and it becomes equal to or higher than VIN - 20mV, the driver FET will turn OFF. Furthermore, when the VOUT pin voltage becomes equal to or higher than VIN + 20mV, the IC’s internal power supply will switch from VIN to VOUT, which can prevent backflow current flowing from the VOUT pin through the parasitic diode to the VIN pin, while also interrupting current flowing from VIN to the IC.
Published: |