Datasheet4U Logo Datasheet4U.com

XC8110 - Load switch

Datasheet Summary

Description

(CE), over current limit, inrush current limit, and thermal shutdown.

Features

  • ut Voltage Range Output Current Stand-by Current Quiescent Current Reverse Bias Current Forward Voltage Over current limit Short current 1.5V ~ 6.0V XC8110 : 500mA (VIN > 1.7V) XC8111 : 1000mA (VIN >2.0V) 0.65μA 3.6μA 0.8μA 20mV XC8110 : 850mA XC8111 : 1700mA 50mA Function Ideal diode function Reverse Protection.

📥 Download Datasheet

Datasheet preview – XC8110

Datasheet Details

Part number XC8110
Manufacturer Torex
File Size 1.28 MB
Description Load switch
Datasheet download datasheet XC8110 Datasheet
Additional preview pages of the XC8110 datasheet.

📁 Similar Datasheet

  • XC8112B - Step-Down Converter (ETC)
  • XC8101 - High Side Line Switch (Torex Semiconductor)
  • XC8102 - Load Switch (Torex Semiconductor)
  • XC8108 - High Function Power Switch (Torex Semiconductor)
  • XC8 - CompactPCI P1 (OMRON)
  • XC800 - Microcontroller Family Architecture and Instruction Set (Infineon Technologies AG)
  • XC822 - (XC822 / XC824) 8-Bit Single-Chip Microcontroller (Infineon Technologies)
  • XC824 - (XC822 / XC824) 8-Bit Single-Chip Microcontroller (Infineon Technologies)
  • XC835 - (XC835 / XC836) 8-Bit Single-Chip Microcontroller (Infineon Technologies)
  • XC836 - (XC835 / XC836) 8-Bit Single-Chip Microcontroller (Infineon Technologies)
Other Datasheets by Torex

Full PDF Text Transcription

Click to expand full text
XC8110/XC8111 Series ETR33017-006a Load switch IC with ideal diode function ☆Green Operation Compatible ■GENERAL DESCRIPTION The XC8110/XC8111 series are load switch ICs that reproduce ideal diodes and equipped with functions including chip enable (CE), over current limit, inrush current limit, and thermal shutdown. These ICs perform regulation control to ensure that their VOUT pin voltage is a value of VIN - 20mV, so they can suppress heat generation to a greater extent than general diodes. When a voltage is applied at the VOUT pin and it becomes equal to or higher than VIN - 20mV, the driver FET will turn OFF.
Published: |