Datasheet4U Logo Datasheet4U.com

XC6225 - 30mA High Speed LDO Regulator

Description

The XC6225 series is a high accuracy, low noise, and low dropout CMOS LDO regulator.

The series includes a reference voltage source, an error amplifier, a driver transistor, a current limiter, and a phase compensation circuit.

Features

  • Output Current Dropout Voltage Operating Voltage Range Output Voltage Range Accuracy Low Power Consumption Stand-by Current : 30mA : 70mV@ IOUT=30mA, VOUT=3.2V : 2.5V ~ 6.0V : 0.8V~5.0V (0.05V increments) : +2% (VOUT>1.5V) +0.03V (VOUT≦1.45V) : 25μA (TYP. ) : Less than 0.1μA High Ripple Rejection : 70dB @ 1kHz Operating Ambient : -40℃~+85℃ Temperature Output Capacitor : 1.0μF ceramic capacitor CL High-Speed Auto-Discharge (XC6225B) Low Output Noise Packages : USP-4.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
XC6206 100mA Low Dropout CMOS Voltage Regulators JinYu
XC6206 Linear voltage regulator UMW
XC6211 300mA High Speed LDO Regulators Torex
XC6218 Low Power Supply LDO Regulators TOREX
XC6238 300mA High Speed LDO Regulator Torex

Other Datasheets by Torex Semiconductor

Part Number Description
XC6220 1A LDO Voltage Regulator
XC6221 Low ESR Caps Compatible High Speed LDO Voltage Regulators
XC6222 700mA High Speed LDO Regulator
XC6223 300mA High Speed LDO Voltage Regulator
XC6224 150mA High Speed LDO Voltage Regulator

Full PDF Text Transcription

Click to expand full text
XC6225 series is Not Recommended for New Designs. XC6225 Series 30mA High Speed LDO Regulator ETR0342-006 ■GENERAL DESCRIPTION The XC6225 series is a high accuracy, low noise, and low dropout CMOS LDO regulator. The series includes a reference voltage source, an error amplifier, a driver transistor, a current limiter, and a phase compensation circuit. The CE function enables the entire circuit to be turned off by a low level input signal to the CE pin. In this stand-by state, the XC6225B series can discharge the electric charge stored at the output capacitor through the internal auto-discharge switch, and as a result the VOUT pin quickly returns to the VSS level. The output stabilization capacitor (CL) is also compatible with low ESR ceramic capacitors. Output voltage is selectable in 0.
Published: |