Datasheet4U Logo Datasheet4U.com

OPB816Z - Slotted Optical Switch

Description

The OPB816Z slotted switch consists of an infrared emitting diode and an NPN silicon phototransistor mounted in an opaque housing with clear windows for dust protection.

Switching of the phototransistor occurs whenever an opaque object passes through the slot.

Features

  • 0.20” (5.1 mm) wide gap, 0.61” (15.5 mm) deep slot.
  • Wire length 24” (609 mm) minimum, 26 AWG.
  • Dust protection.
  • Two mounting tabs.

📥 Download Datasheet

📁 Similar Datasheet

  • OPB804 - Slotted Optical Switch (OPTEK)
  • OPB821 - Slotted Optical Switches (OPTEK)
  • OPB821S10 - Slotted Optical Switches (OPTEK)
  • OPB821S3 - Slotted Optical Switches (OPTEK)
  • OPB821S5 - Slotted Optical Switches (OPTEK)
  • OPB823A - SLOTTED OPTICAL SWITCHES (ETC)
  • OPB824A - SLOTTED OPTICAL SWITCHES (ETC)
  • OPB826S - Dual Channel Slotted Optical Switches (OPTEK)
  • OPB826SD - Dual Channel Slotted Optical Switches (OPTEK)
  • OPB829A - SLOTTED OPTICAL SWITCHES (ETC)
Other Datasheets by TT

Full PDF Text Transcription

Click to expand full text
Slotted Optical Switch OPB816Z Features:  0.20” (5.1 mm) wide gap, 0.61” (15.5 mm) deep slot  Wire length 24” (609 mm) minimum, 26 AWG  Dust protection  Two mounting tabs Description: The OPB816Z slotted switch consists of an infrared emitting diode and an NPN silicon phototransistor mounted in an opaque housing with clear windows for dust protection. Switching of the phototransistor occurs whenever an opaque object passes through the slot. The OPB816Z has an 0.61” (15.5 mm) deep slot allowing for a longer reach of the optical center line from the mounting plane. The phototransistor internal apertures are 0.010” x 0.06” (0.25 mm x 1.52 mm) on the sensor side (“S”) and 0.05” x 0.06” (1.27 mm x 1.52 mm) on the emitter side (“E”).
Published: |