Datasheet4U Logo Datasheet4U.com

CXG1047FN - Dual-Band 3V Power Amplifier

Description

The CXG1047FN dual band GaAs PA is a 3-stage power amplifier that may be used for both GSM900 and DCS1800 applications.

To achieve minimum die-size and package dimensions, it contains one amplifier chain with a single input and output.

Features

  • Single positive rail only.
  • Typical output power of 35.5dBm at 900MHz and 33dBm at 1800MHz.
  • Typical efficiency of 37% at 900MHz and 37% at 1800MHz.
  • Small package size with integral heat-sink: 16-pin HSOF (5.6 × 4.4 × 0.9mm).
  • 3-stage amplifier chain.
  • Simple pin diode circuitry is used to switch between 1800 and 900MHz matching circuits.
  • Off mode insertion loss typically 27dB at 900MHz (Pin = +6dBm at VDD = 0V).
  • Typical transm.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CXG1100TN High Power DPDT Switch Sony
CXG1115ER Dual-band Low Noise Amplifier/Mixer Sony
CXG1172UR JPHEMT High Power DPDT Switch Sony
CXG1173UR High Power SPDT Switch Sony
CXG1175UR High Power DPDT Switch SONY

Other Datasheets by Sony Semiconductor Solutions

Part Number Description
CXG1040TN High Isolation DPDT Switch
CXG1045N High Power DPDT Switch
CXG1045N GSM900/1800/1900 SPDT TX/RX Switch
CXG1006N GSM900/1800/1900 SPDT TX/RX Switch
CXG1008N High Isolation SPDT Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CXG1047FN Dual-Band 3V Power Amplifier for GSM900/DCS1800 Applications Description The CXG1047FN dual band GaAs PA is a 3-stage power amplifier that may be used for both GSM900 and DCS1800 applications. To achieve minimum die-size and package dimensions, it contains one amplifier chain with a single input and output. The PA has a single RF input for both the GSM900 and DCS1800 transmit signals. The amplifier can be configured for 2 separate inputs. Power control is best achieved by variation of VDD1/VDD2 and VDD3 drain voltages with an external transistor. A proposed power control circuit configuration is described. External PMOS drain switch should be used to achieve low leakage. 16 pin HSOF (Plastic) Features • Single positive rail only • Typical output power of 35.
Published: |