Datasheet4U Logo Datasheet4U.com

CXA2510AQ - Dolby B Type Noise Reduction System with Playback Equalizer Amplifier

Description

The CXA2510AQ is an IC designed for use in car stereo cassette decks.

Functions include Dolby B type noise reduction (NR) system, playback equalizer amplifier and music sensor into a single chip.

Features

  • Few external parts.
  • Small package (40-pin QFP).
  • Same pin configuration as for the Dolby B-C type NR system (CXA2511AQ) and no Dolby NR system (CXA2509AQ).
  • Dolby B type NR and playback equalizer amplifier into a single chip.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
CXA2520 LED Cree
CXA2521AQ RF AMplifier for CD Player and CD-ROM Sony
CXA2521Q RF AMplifier for CD Player Sony
CXA2530 LED Cree
CXA2540 LED CREE

Other Datasheets by Sony Semiconductor Solutions

Part Number Description
CXA2511AQ Dolby B-C Type Noise Reduction System with Playback Equalizer Amplifier
CXA2513M 3-Band Preset Graphic Equalizer IC (with standby and memory on last preset mode)
CXA2515AM RF Amplifier for CD Player and CD-ROM
CXA2515AN RF Amplifier for CD Player and CD-ROM
CXA2500M Dual REC/PB Preamplifier

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
CXA2510AQ Dolby∗ B Type Noise Reduction System with Playback Equalizer Amplifier Description The CXA2510AQ is an IC designed for use in car stereo cassette decks. Functions include Dolby B type noise reduction (NR) system, playback equalizer amplifier and music sensor into a single chip. Features • Few external parts • Small package (40-pin QFP) • Same pin configuration as for the Dolby B-C type NR system (CXA2511AQ) and no Dolby NR system (CXA2509AQ) • Dolby B type NR and playback equalizer amplifier into a single chip • FORWARD/REVERSE head select switch • Two-system (TAPE/AUX) input select switch • Music signal interval detection level can be set by the external resistors/capacitors (2 modes).
Published: |