Datasheet4U Logo Datasheet4U.com

SKY13298-360LF - GaAs SP2T Switch for Ultra Wideband (UWB) 3 - 8 GHz

Description

The SKY13298-360LF is a pHEMT GaAs FET IC switch packaged in an 2 x 2 mm, 8-lead exposed pad plastic package for low-cost commercial applications.

The use of the VBIAS line enables the part to be used with low control bias voltages down to 1.8 V.

Features

  • G G G G Functional Block Diagram RFc Positive voltage control (0/1.8 V to 0/3.3 V) High isolation 25 dB for BG1, 25 dB for BG3 Low loss 0.7 dB typical for BG1, 0.9 dB for BG3 Lead (Pb)-free and RoHS-compliant J2 J1.

📥 Download Datasheet

Datasheet Details

Part number SKY13298-360LF
Manufacturer Skyworks Solutions
File Size 486.82 KB
Description GaAs SP2T Switch for Ultra Wideband (UWB) 3 - 8 GHz
Datasheet download datasheet SKY13298-360LF Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SKY13586-678LF 2.4 to 2.5GHz SP3T Switch Skyworks
SKY12207-306LF 0.9 to 4.0 GHz 50 W High Power Silicon PIN Diode SPDT Switch Skyworks
SKY16602-632LF Low-Threshold PIN Diode Skyworks
SKY-60LH Frequency Mixer Mini-Circuits
SKY-60MH Level 13 (LO Power +13dBm) 2500 to 6000 MHz Mini-Circuits

Other Datasheets by Skyworks Solutions

Part Number Description
SKY13290-313LF PHEMT 10W SPDT Switch 500MHz - 2.5GHz
SKY13292-365LF 4 x 2 Switch Matrix with Tone/Voltage Decoder 250 MHz-2.15 GHz
SKY13296-340LF GaAs SP4T Absorptive Switch
SKY13299-321LF 7W SPDT Switch
SKY13251-349 SP3T Switch

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com DATA SHEET SKY13298-360LF: GaAs SP2T Switch for Ultra Wideband (UWB) 3–8 GHz Features G G G G Functional Block Diagram RFc Positive voltage control (0/1.8 V to 0/3.3 V) High isolation 25 dB for BG1, 25 dB for BG3 Low loss 0.7 dB typical for BG1, 0.9 dB for BG3 Lead (Pb)-free and RoHS-compliant J2 J1 Description The SKY13298-360LF is a pHEMT GaAs FET IC switch packaged in an 2 x 2 mm, 8-lead exposed pad plastic package for low-cost commercial applications. The use of the VBIAS line enables the part to be used with low control bias voltages down to 1.8 V. This switch is ideal for Ultra Wide Band (UWB) applications covering BG1 and BG3. For 3.3 V control, the VBIAS is not required and is left open circuit on the board.
Published: |