Datasheet4U Logo Datasheet4U.com

SKY13290-313LF - PHEMT 10W SPDT Switch 500MHz - 2.5GHz

Description

The SKY13290-313LF is a PHEMT IC high-power SPDT switch.

2.5 GHz, where low loss, high isolation, low control voltage and ultraminiature package size are required.

Features

  • Broadband: 500 MHz.
  • 2.5 GHz G Very low insertion loss: 0.4 dB typ. @ 900 MHz G High isolation: 26 dB typ. @ 900 MHz G High input power compression: 0.1 dB at > 40 dBm G Low current consumption:.

📥 Download Datasheet

Datasheet Details

Part number SKY13290-313LF
Manufacturer Skyworks Solutions
File Size 207.41 KB
Description PHEMT 10W SPDT Switch 500MHz - 2.5GHz
Datasheet download datasheet SKY13290-313LF Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SKY13586-678LF 2.4 to 2.5GHz SP3T Switch Skyworks
SKY12207-306LF 0.9 to 4.0 GHz 50 W High Power Silicon PIN Diode SPDT Switch Skyworks
SKY16602-632LF Low-Threshold PIN Diode Skyworks
SKY-60LH Frequency Mixer Mini-Circuits
SKY-60MH Level 13 (LO Power +13dBm) 2500 to 6000 MHz Mini-Circuits

Other Datasheets by Skyworks Solutions

Part Number Description
SKY13292-365LF 4 x 2 Switch Matrix with Tone/Voltage Decoder 250 MHz-2.15 GHz
SKY13296-340LF GaAs SP4T Absorptive Switch
SKY13298-360LF GaAs SP2T Switch for Ultra Wideband (UWB) 3 - 8 GHz
SKY13299-321LF 7W SPDT Switch
SKY13251-349 SP3T Switch

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com DATA SHEET SKY13290-313LF: PHEMT 10 W SPDT Switch 500 MHz–2.5 GHz Features Broadband: 500 MHz–2.5 GHz G Very low insertion loss: 0.4 dB typ. @ 900 MHz G High isolation: 26 dB typ. @ 900 MHz G High input power compression: 0.1 dB at > 40 dBm G Low current consumption: <100 µA @ 3 V G Miniature QFN-6 2 x 3 mm package G Lead (Pb)-free and RoHS-compliant MSL-1 @ 260 °C per JEDEC J-STD-020 G Functional Block Diagram J2 V1 J1 J3 V2 Description The SKY13290-313LF is a PHEMT IC high-power SPDT switch. This high-power switch has been designed for use from 500 MHz–2.5 GHz, where low loss, high isolation, low control voltage and ultraminiature package size are required. It can be controlled with positive, negative or a combination of both voltages.
Published: |