Datasheet4U Logo Datasheet4U.com

SDA9255 - SRC Scan Rate Converter

General Description

are fulfilled.

Nominal conditions specify mean values expected over the production spread and are the proposed values for interface and application.

If not stated otherwise, nominal values will apply at TA = 25°C and the nominal supply voltage.

Key Features

  • . . . General.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
SDA9290-5 Picture Processor Siemens Semiconductor
SDA9086-3 Horizontal PLL for Picture-in-Picture Infineon Technologies
SDA9087 Analog-Digital Interface for Inserted Picture Infineon Technologies
SDA9088 Picture-in-Picture Processor Infineon Technologies
SDA9103CTNA (SDA9103CTNA - SDA9105CTNA) HYPER FAST CENTERTAP RECTIFIER SSDI

Other Datasheets by Siemens Semiconductor Group (now Infineon)

Part Number Description
SDA9251-2X 868352-Bit Dynamic Sequential Access Memory for Television Applications (TV-SAM)
SDA9253 2.6 MBit Dynamic Sequential Access Memory for Television Applications (TV-SAM)
SDA9254-2 2.6 MBit Dynamic Sequential Access Memory for Television Applications (TV-SAM) with On-chip Noise Reduction Filter
SDA9257 Clock Sync Generator
SDA9205-2 Triple 8-Bit Analog-to-Digital-Converter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
ICs for Consumer Electronics SRC-Scan Rate Converter SDA 9255 Data Sheet 1998-02-01 Edition 1998-02-01 This edition was realized using the software system FrameMaker® Published by Siemens AG, Bereich Halbleiter, Marketing-Kommunikation, Balanstraße 73, 81541 München © Siemens AG 8.2.98. All Rights Reserved. Attention please! As far as patents or other rights of third parties are concerned, liability is only assumed for components, not for applications, processes and circuits implemented within components or assemblies. The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved.