Datasheet4U Logo Datasheet4U.com

LB1847 - PWM Current Control Type Stepping Motor Driver

Description

Sets the OFF time for FAST mode and SLOW mode in MIX DECAY Setting input range: 4V to 1.5V Output set current reference supply pin Setting voltage range: 0V to 3V Output OFF time setting pin for switching operation CR1 CR2 E1 E2 DECAY1 DECAY2 Pin for controlling the set current with sensing resist

Features

  • PWM current control (fixed OFF time) Load current digital selector (1-2, W1-2, 2W1-2, 4W1-2 phase exciter drive possible) Selectable current decay pattern (SLOW DECAY, FAST DECAY, MIX DECAY) Simultaneous ON prevention function (feedthrough current prevention) Noise canceler Built-in thermal shutdown circuit Built-in logic low-voltage OFF circuit Any and all SANYO products described or contained herein do not have specificatio.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LB1847 Stepping Motor Driver ON Semiconductor
LB1843V bidirectional motor driver ON Semiconductor
LB1846MC Low-Voltage/Low Saturation Voltage Type Bidirectional Motor Driver ON Semiconductor
LB1800CL Stepping Motor Driver Sanyo Semicon Device
LB1801CL Stepping Motor Driver Sanyo Semicon Device

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LB1840 Low-voltage/Low-saturation Bidirectional Variable Constant-voltage Motor Driver
LB1840M Low-voltage/Low-saturation Bidirectional Variable Constant-voltage Motor Driver
LB1841 Low-Saturation Current-Controlled Forward/Reverse Motor Driver
LB1841V Low-Saturation Current-Controlled Forward/Reverse Motor Driver
LB1843V Low-saturation / current-controlled bidirectional motor driver

Full PDF Text Transcription

Click to expand full text
Ordering number : EN5982 LB1847 Monolithic Digital IC LB1847 PWM Current Control Type Stepping Motor Driver Overview The LB1847 is a driver IC for stepping motors with PWM current control bipolar drive (fixed OFF time). A special feature of this IC is that VREF voltage is constant while the current can be set in 15 steps, allowing drive of motors ranging from 12 phase exciter types to 4W 1-2 phase exciter types. The current decay pattern can also be selected (SLOW DECAY, FAST DECAY, MIX DECAY) to increase the decay of regenerative current at chopping OFF, thereby improving response characteristics. This is especially useful for carriage and paper feed stepping motors in printers and similar applications where highprecision control and low vibrations are required.
Published: |