Datasheet4U Logo Datasheet4U.com

LB1847 - Stepping Motor Driver

Features

  • PWM current control (fixed OFF time).
  • Load current digital selector (1-2, W1-2, 2W1-2, 4W1-2 phase exciter drive possible).
  • Selectable current decay pattern (SLOW DECAY, FAST DECAY, MIX DECAY).
  • Simultaneous ON prevention function (feed-through current prevention).
  • Noise canceler.
  • Built-in thermal shutdown circuit.
  • Built-in logic low-voltage OFF circuit Specifications Absolute Maximum Ratings at Ta = 25°C Parameter Motor supply vol.

📥 Download Datasheet

Datasheet Details

Part number LB1847
Manufacturer onsemi
File Size 128.12 KB
Description Stepping Motor Driver
Datasheet download datasheet LB1847 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LB1847 PWM Current Control Type Stepping Motor Driver Sanyo
LB1840 Low-voltage/Low-saturation Bidirectional Variable Constant-voltage Motor Driver Sanyo
LB1840M Low-voltage/Low-saturation Bidirectional Variable Constant-voltage Motor Driver Sanyo
LB1841 Low-Saturation Current-Controlled Forward/Reverse Motor Driver Sanyo
LB1841V Low-Saturation Current-Controlled Forward/Reverse Motor Driver Sanyo

Other Datasheets by onsemi

Part Number Description
LB1843V bidirectional motor driver
LB1846MC Low-Voltage/Low Saturation Voltage Type Bidirectional Motor Driver
LB1837M Low-voltage/Low-saturation Bidirectional Constant-Voltage Regulated Motor Driver
LB1838M Bidirectional Motor Driver
LB1860 Two-Phase Half-Wave Variable Speed Fan Motor Driver

Full PDF Text Transcription

Click to expand full text
Ordering number : EN5982A LB1847 Monolithic Digital IC PWM Current Control Type Stepping Motor Driver http://onsemi.com Overview The LB1847 is a driver IC for stepping motors with PWM current control bipolar drive (fixed OFF time). A special feature of this IC is that VREF voltage is constant while the current can be set in 15 steps, allowing drive of motors ranging from 1-2 phase exciter types to 4W 1-2 phase exciter types. The current decay pattern can also be selected (SLOW DECAY, FAST DECAY, MIX DECAY) to increase the decay of regenerative current at chopping OFF, thereby improving response characteristics. This is especially useful for carriage and paper feed stepping motors in printers and similar applications where high-precision control and low vibrations are required.
Published: |