Datasheet4U Logo Datasheet4U.com

LE25FU206 - 2M-bit Serial Flash Memory

Description

Symbol SCK Pin Name Serial clock This pin controls the data input/output timing.

The input data and addresses are latched synchronized to the rising edge of the serial clock, and the data is output synchronized to the falling edge of the serial clock.

Features

  • inherent to a serial flash memory device, the LE25FU206 is housed in an 8-pin ultraminiature package. Serial flash memory devices tend to be at a disadvantage in terms of their read speed, but the LE25FU206 has maximally eliminated this speed-related disadvantage by supporting clocks with frequencies up to 30MHz under SPI bus specifications. All these features make this device ideally suited to storing program codes in.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LE25FV051T 512K Serial Flash EEPROM Sanyo Electric
LE25FV055T 512K-bit (64K x 8) Serial Flash Memory Sanyo
LE25FV101T 1M Serial Flash EEPROM Sanyo Electric
LE25AB VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT STMicroelectronics
LE25ABD VERY LOW DROP VOLTAGE REGULATORS WITH INHIBIT STMicroelectronics

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LE25FU106B CMOS IC 1M-bit (128K X 8) Serial Flash Memory
LE25FU406B CMOS IC 4M-bit (512K X 8) Serial Flash Memory
LE25FS406 4M-bit (512K X 8) Serial Flash Memory
LE25FW203A CMOS IC 2M-bit (256K X 8) Serial Flash Memory 30MHz SPI Bus
LE25FW403A 4M-bit Serial Flash Memory 30MHz SPI Bus

Full PDF Text Transcription

Click to expand full text
Ordering number : EN*A1191 LE25FU206 Overview CMOS IC 2M-bit (256K×8) Serial Flash Memory The LE25FU206 is a serial interface-compatible flash memory device with a 256K × 8-bit configuration. It uses a single 2.5V power supply for both reading and writing (program and erase functions) and does not require a special power supply. As such, it can support on-board programming. It has three erase functions, each of which corresponds to the size of the memory area in which the data is to be erased at one time: the small sector (4K bytes) erase function, the sector (64K bytes) erase function, and the chip erase function (for erasing all the data together). The memory space can be efficiently utilized by selecting one of these functions depending on the application.
Published: |