Datasheet4U Logo Datasheet4U.com

LC75344M - Two-Channel Electronic Volume Control

Key Features

  • Built-in buffer amplifiers minimize the number of external components required.
  • Fabricated in a silicon gate CMOS process to minimize the switching noise generated by internal switches.
  • Built-in reference voltage generation circuit for the analog ground level.
  • All settings are controlled by data input over a serial interface that conforms to the CCB specifications. SANYO: MFP-10S (225 mil).
  • CCB is a trademark of SANYO.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC75344MD Two-Channel Electronic Volume Controller ON Semiconductor

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LC75341 Single-Chip Volume and Tone Control
LC75341M Single-Chip Volume and Tone Control
LC75342 Single-Chip Volume and Tone Control
LC75342M Single-Chip Volume and Tone Control
LC75343M Electronic Volume Control
LC7533 3V Electronic Volume Control
LC7535M Electronic Volume/Loudness Control
LC7535P High-voltage/ Two-channel Electronic Attenuator
LC75366 Two-Channel Electronic Volume Control
LC75366M Two-Channel Electronic Volume Control

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : ENN7332 CMOS LSI LC75344M Two-Channel Electronic Volume Control System Overview The LC75344M is a two-channel electronic volume control IC that is controlled by data input over a serial interface. Functions • Volume control: 0 dB to –50 dB in 1 dB steps, –52 dB to –78 dB in 2 dB steps, and –∞, for a total of 66 positions. A balance function can be implemented by controlling the left and right channels independently. Package Dimensions unit: mm 3086B-MFP10S [LC75344M] Features • Built-in buffer amplifiers minimize the number of external components required. • Fabricated in a silicon gate CMOS process to minimize the switching noise generated by internal switches. • Built-in reference voltage generation circuit for the analog ground level.