Datasheet4U Logo Datasheet4U.com

LC75366M - Two-Channel Electronic Volume Control

Features

  • Silicon gate CMOS process for low switching noise Functions.
  • Volume: 0 dB to.
  • 68 dB (in 2 dB steps) and.
  • ∞ ; 36 positions. A balance function can be implemented by controlling the left and right channel volume settings independently.
  • Loudness: Taps are provided at the.
  • 20 dB positions in the 10 dB step resistor ladder used by the volume control function. A loudness function can be implemented by attaching external RC circuits at these tap po.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
LC7530 CMOS LSI Sanyo Semiconductor
LC75344MD Two-Channel Electronic Volume Controller ON Semiconductor
LC75345M Electronic Volume Control System on-Chip Sanyo Electric
LC75347E 6-Channel Single-Chip Electronic Volume Control System Sanyo Electric
LC75348 Single-Chip Electronic Volume and Tone Control System Sanyo Electric

Other Datasheets by SANYO (now Panasonic)

Part Number Description
LC75366 Two-Channel Electronic Volume Control
LC7536LHS High-voltage/ Two-channel Electronic Attenuator
LC7536M electronic volume control
LC7536R Electronic Volume Control
LC7533 3V Electronic Volume Control

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Ordering number : EN4929A CMOS LSI LC75366, 75366M Two-Channel Electronic Volume Control Overview The LC75366 (DIP20) and the LC75366M (MFP20) are electronic volume controls that can be controlled by serial input data and provide volume, balance and loudness functions. Package Dimensions unit: mm 3021B-DIP20 [LC75366] Features • Silicon gate CMOS process for low switching noise Functions • Volume: 0 dB to –68 dB (in 2 dB steps) and – ∞ ; 36 positions. A balance function can be implemented by controlling the left and right channel volume settings independently. • Loudness: Taps are provided at the –20 dB positions in the 10 dB step resistor ladder used by the volume control function. A loudness function can be implemented by attaching external RC circuits at these tap points.
Published: |