Datasheet4U Logo Datasheet4U.com

S6B0755 - 128 SEG / 65 COM DRIVER & CONTROLLER FOR STN LCD

Description

for data latch with (page 12) C2 CAP value : 0.1 to 0.47uF → 0.47 to 2.0uF (page 30) Added description of the column address operation.

(page 35) Added that Display On/Off command has priority over Entire Display On/Off and Reverse Display On/Off.

Features

  • Driver Output Circuits.
  • 65 common outputs / 128 segment outputs Applicable Duty Ratios Programmable duty ratio.
  • 1/17 to 1/65 Various partial display Partial window moving & data scrolling Applicable LCD bias 1/4 to 1/9 Maximum display area 65 × 128 On-chip Display Data RAM Capacity: 65 x 128 = 8,320 bits Bit data "1": a dot of display is illuminated.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S6B 6 Amp Silicon Rectifier 50 to 1000 Volts Micro Commercial Components
S6B60KD IRGS6B60KD International Rectifier
S6BP201A Synchronous Buck-boost DC/DC Converter Cypress
S6BP401A Power Management Cypress
S6BP501A 3ch DC/DC Converter Cypress

Other Datasheets by Samsung Semiconductor

Part Number Description
S6B0759 81 COM / 128 SEG DRIVER & CONTROLLER FOR STN LCD
S6B0708 64COM/128SEG GRAPHIC DRIVER FOR DOT MATRIX LCD
S6B0715 33 COM / 100 SEG DRIVER & CONTROLLER FOR STN LCD
S6B0716 33 COM / 100 SEG DRIVER & CONTROLLER FOR STN LCD
S6B0717 55-COM / 100-SEG DRIVER/CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S6B0755 128 SEG / 65 COM DRIVER & CONTROLLER FOR STN LCD JUNE. 2000. Ver. 1.0 Prepared by Hyoung_Seok ,Lee mailto:lhs98@samsung.co.kr Contents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of LCD Driver IC Team. 128 SEG / 65 COM DRIVER & CONTROLLER FOR STN LCD PRELIMINARY SPEC. VER. 1.0 S6B0755 S6B0755 Specification Revision History Version 0.0 0.1 Original Append PAD configuration Append COG/ILB align key coordinates and TOM coordinate Append PAD center coordinates to table 1, 2 Added 6800-mode interface description for data latch with (page 12) C2 CAP value : 0.1 to 0.47uF → 0.47 to 2.
Published: |