Datasheet4U Logo Datasheet4U.com

S6B0718 - 104 SEG / 81 COM DRIVER & CONTROLLER FOR STN LCD

Description

7 POWER SUPPLY7 LCD DRIVER SUPPLY7 SYSTEM CONTROL 8 MICROPROCESSOR INTERFACE 9 LCD DRIVER OUTPUTS 11 FUNCTIONAL DESCRIPTION12 MICROPROCESSOR INTERFACE 12 DISPLAY DATA RAM (DDRAM) 15 LCD DISPLAY CIRCUITS19 LCD DRIVER CIRCUIT 21 POWER SUPPLY CIRCUITS 24 REFERECE CIRCUIT EXAMPLES29 RESET CIRCUIT 31 INS

Features

  • Driver Output Circuits.
  • 81 common outputs / 104 segment outputs Applicable Duty Ratios Programmable duty ratio.
  • 1/9 to 1/81 Various partial display Partial window moving & data scrolling Applicable LCD bias 1/4 to 1/11 Maximum display area 81 × 104 On-chip Display Data RAM Capacity: 89 x 104 = 9,256 bits Bit data "1": a.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S6B 6 Amp Silicon Rectifier 50 to 1000 Volts Micro Commercial Components
S6B60KD IRGS6B60KD International Rectifier
S6BP201A Synchronous Buck-boost DC/DC Converter Cypress
S6BP401A Power Management Cypress
S6BP501A 3ch DC/DC Converter Cypress

Other Datasheets by Samsung Semiconductor

Part Number Description
S6B0715 33 COM / 100 SEG DRIVER & CONTROLLER FOR STN LCD
S6B0716 33 COM / 100 SEG DRIVER & CONTROLLER FOR STN LCD
S6B0717 55-COM / 100-SEG DRIVER/CONTROLLER
S6B0717X01-02X0 55-COM / 100-SEG DRIVER/CONTROLLER
S6B0717X01-B0CY 55-COM / 100-SEG DRIVER/CONTROLLER

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S6B0718 104 SEG / 81 COM DRIVER & CONTROLLER FOR STN LCD Feb. 2000. Ver. 2.1 Prepared by: Hyoung-Seok Lee lhs98@samsung.co.kr Contents in this document are subject to change without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of LCD Driver IC Team. 104 SEG / 81 COM DRIVER & CONTROLLER FOR STN LCD S6B0718 S6B0718 Specification Revision History Version 0.0 0.1 Original Modify syntax errors Append n-line inversion wave form to figure 11 on page 19. Modify figure 12 on page 20 Change the number of COM/SEG (85COM / 100SEG -> 81COM / 104SEG) Modify PAD location 1.
Published: |