Datasheet4U Logo Datasheet4U.com

S5D2501F - OSD PROCESSOR FOR MONITORS

Description

Table 1.

Pin Descriptions Pin No.

1 2 3 Signal VSS_A VCO_IN VREF1 Active I/O Input Input Ground (Analog Part) This voltage is generated at the external loop filter and goes into the input stage of the VCO.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S5D Surface Mount Glass Passivated Rectifier Vishay
S5D Standard silicon rectifier diodes Semikron International
S5D 5 Amp Silicon Rectifier 50 to 1000 Volts Micro Commercial Components
S5D SURFACE MOUNT RECTIFIER DIODES Sunmate
S5D SURFACE MOUNT RECTIFIER PAN JIT

Other Datasheets by Samsung Semiconductor

Part Number Description
S5D2508A01 OSD PROCESSOR FOR MONITOR
S5D2510 stand-alone OSD Processor
S5D2400X S5D2400X scaling image processor
S5D2650 MULTISTANDARD VIDEO DECODER/SCALER
S5D0127X01 Multistandard Video Decoder / Scaler

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
JAN. 2000 DATA SHEET S5D2501F OSD PROCESSOR FOR MONITORS S5D2501F OVERVIEW The S5D2501F is used to display some characters or symbols on a screen of monitor. Basically, the operation is to control the internal memory on chip and generate the R,G,B signals for some characters or symbols. The R,G,B signals are synchronized with the horizontal sync. Then the R,G,B signals are mixed with the main video signal in the Video Amp IC. The font data for characters or symbols are stored in the internal ROM. This stored data are accessed and controlled by the control data from a micro controller. The control data are transmitted through the I2C bus. All timing control signals including the system clock are synchronized with the horizontal sync. Therefore there is a PLL circuitry on chip.
Published: |