Datasheet4U Logo Datasheet4U.com

S524C80D80 - 1K/2K/4K/8K-bit Serial EEPROM

Description

Name A0, A1, A2 VSS SDA Type Input

I/O Description Input pins for device address selection.

To configure a device address, these pins should be connected to the VCC or VSS of the device.

Ground pin.

Features

  • are a hardware-based write protection circuit for the entire memory area and software-based write protection logic for the lower 128 bytes. Hardware-based write protection is controlled by the state of the write-protect (WP) pin. The software-based method is one-time programmable and permanent. Using one-page write mode, you can load up to 16 bytes of data into the EEPROM in a single write operation. Another significant feature of the S524C20D10/20D20/80D40/80D80 is its support for fast mode and.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
S520U 5.0AMP SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER XINNUO
S5210 Thyristors RCA
S5210B Thyristors RCA
S5210D Thyristors RCA
S5210M Thyristors RCA

Other Datasheets by Samsung Semiconductor

Part Number Description
S524C80D81 1K/2K/4K/8K-bit Serial EEPROM
S524C80D40 1K/2K/4K/8K-bit Serial EEPROM
S524C80D41 1K/2K/4K/8K-bit Serial EEPROM
S524C20D10 1K/2K/4K/8K-bit Serial EEPROM
S524C20D11 1K/2K/4K/8K-bit Serial EEPROM

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
S524C20D10/20D20/80D40/80D80 1K/2K/4K/8K-bit Serial EEPROM with software write protect Data Sheet OVERVIEW The S524C20D10/20D20/80D40/80D80 serial EEPROM has a 1,024/2,048/4,096/8,192-bit (128/256/512/1,024byte) capacity, supporting the standard I2C™-bus serial interface. It is fabricated using Samsung’ s most advanced CMOS technology. Important features are a hardware-based write protection circuit for the entire memory area and software-based write protection logic for the lower 128 bytes. Hardware-based write protection is controlled by the state of the write-protect (WP) pin. The software-based method is one-time programmable and permanent. Using one-page write mode, you can load up to 16 bytes of data into the EEPROM in a single write operation.
Published: |