Datasheet4U Logo Datasheet4U.com

BD1LB500EFJ-C - In-Vehicle 1ch Low Side Switch

This page provides the datasheet information for the BD1LB500EFJ-C, a member of the BD1LB500 In-Vehicle 1ch Low Side Switch family.

Description

Pin No.

Input terminal; a pull down resistor is connected internally.

and in the overheat state.

Features

  • Built-in overcurrent limiting circuit.
  • Built-in thermal shutdown circuit (TSD).
  • Built-in open load detection circuit (at output OFF).
  • Enables direct control from CMOS logic ICs, etc.
  • Low standby current.
  • Built-in under voltage lock out circuit.
  • Built-in diagnostic output (ST) terminal.
  • Low ON resistance RDS(ON)=350mΩ(Typ) (VDD=IN=5V, Ta=25°C, IOUT=0.25A).
  • Built-in overvoltage protection(active clamp) for output circuit.
  • Monolithic power IC in w.

📥 Download Datasheet

Datasheet preview – BD1LB500EFJ-C

Datasheet Details

Part number BD1LB500EFJ-C
Manufacturer ROHM
File Size 1.09 MB
Description In-Vehicle 1ch Low Side Switch
Datasheet download datasheet BD1LB500EFJ-C Datasheet
Additional preview pages of the BD1LB500EFJ-C datasheet.

📁 Similar Datasheet

  • BD101 - RECTIFIER DIODE (Sinyork)
  • BD101W - RECTIFIER DIODE (Sinyork)
  • BD101WS - RECTIFIER DIODE (Sinyork)
  • BD1040S - SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS (Pan Jit International)
  • BD107 - Silicon NPN Power Transistor (Inchange Semiconductor)
  • BD10H150CS - ULTRA LOW IR SCHOTTKY BARRIER RECTIFIERS (Pan Jit International)
  • BD10H200CS - ULTRA LOW IR SCHOTTKY BARRIER RECTIFIERS (Pan Jit International)
  • BD112 - NPN Transistor (INCHANGE)
  • BD115 - Small Signal Transistors (Central Semiconductor)
  • BD115 - NPN Silicon Transistor (TRANSYS)
Other Datasheets by Rohm

Full PDF Text Transcription

Click to expand full text
Datasheet 1ch Low Side Switch IC In-Vehicle 1ch Low Side Switch BD1LB500 Series (BD1LB500EFJ-C BD1LBU50EFJ-C BD1LB500FVM-C) Features ■ Built-in overcurrent limiting circuit ■ Built-in thermal shutdown circuit (TSD) ■ Built-in open load detection circuit (at output OFF) ■ Enables direct control from CMOS logic ICs, etc. ■ Low standby current ■ Built-in under voltage lock out circuit ■ Built-in diagnostic output (ST) terminal ■ Low ON resistance RDS(ON)=350mΩ(Typ) (VDD=IN=5V, Ta=25°C, IOUT=0.
Published: |