BD1LB500 Datasheet PDF (In-Vehicle 1ch Low Side Switch)

BD1LB500 - In-Vehicle 1ch Low Side Switch

Description

Pin No.

Input terminal; a pull down resistor is connected internally.

and in the overheat state.

Features

Built-in overcurrent limiting circuit.
Built-in thermal shutdown circuit (TSD).
Built-in open load detection circuit (at output OFF).
Enables direct control from CMOS logic ICs, etc.
Low standby current.
Built-in under voltage lock out circuit.
Built-in diagnostic output (ST) terminal.
Low ON resistance RDS(ON)=350mΩ(Typ) (VDD=IN=5V, Ta=25°C, IOUT=0.25A).
Built-in overvoltage protection(active clamp) for output circuit.
Monolithic power IC in w.

Datasheet Details

Part number	BD1LB500
Manufacturer	ROHM
File Size	1.09 MB
Description	In-Vehicle 1ch Low Side Switch
Datasheet	BD1LB500 Datasheet
Additional preview pages of the BD1LB500 datasheet.

📁 Similar Datasheet

BD101 - RECTIFIER DIODE (Sinyork)

BD101W - RECTIFIER DIODE (Sinyork)

BD101WS - RECTIFIER DIODE (Sinyork)

BD1040S - SURFACE MOUNT SCHOTTKY BARRIER RECTIFIERS (Pan Jit International)

BD107 - Silicon NPN Power Transistor (Inchange Semiconductor)

BD10H150CS - ULTRA LOW IR SCHOTTKY BARRIER RECTIFIERS (Pan Jit International)

BD10H200CS - ULTRA LOW IR SCHOTTKY BARRIER RECTIFIERS (Pan Jit International)

BD112 - NPN Transistor (INCHANGE)

BD115 - Small Signal Transistors (Central Semiconductor)

BD115 - NPN Silicon Transistor (TRANSYS)

Full PDF Text Transcription

Click to expand full text

Datasheet 1ch Low Side Switch IC In-Vehicle 1ch Low Side Switch BD1LB500 Series (BD1LB500EFJ-C BD1LBU50EFJ-C BD1LB500FVM-C) Features ■ Built-in overcurrent limiting circuit ■ Built-in thermal shutdown circuit (TSD) ■ Built-in open load detection circuit (at output OFF) ■ Enables direct control from CMOS logic ICs, etc. ■ Low standby current ■ Built-in under voltage lock out circuit ■ Built-in diagnostic output (ST) terminal ■ Low ON resistance RDS(ON)=350mΩ(Typ) (VDD=IN=5V, Ta=25°C, IOUT=0.

Published: Jul 1, 2015 |