Datasheet4U Logo Datasheet4U.com

ISL54227 - High-Speed USB 2.0 (480Mbps) DPST Switch

Description

µTQFN 1 2 3 4 5 6 7 8 9 10 - TDFN 2 3 4 5 6 7 8 9 10 1 PD PIN NAME DESCRIPTION LP Low Power Input D+ USB Data Port COM+ USB Data Port GND Ground Connection COM- USB Data Port D- USB Data Port ALM OVP ALARM Interrupt Output OE Switch Enable VDD Power Supply INT Charger Mode Interrupt O

Features

  • High-speed (480Mbps) and full-speed (12Mbps) signaling capability per USB 2.0.
  • 1.8V logic compatible (2.7V to +3.6V supply).
  • Alarm overvoltage indicator output.
  • Charger interrupt indicator output.
  • Low power state.
  • Power OFF protection.
  • COM pins overvoltage detection and protection for +5.25V and -5V fault voltages.
  • -3dB Frequency.
  • . 790MHz.
  • Low ON capacitance @ 24.

📥 Download Datasheet

Datasheet Details

Part number ISL54227
Manufacturer Renesas
File Size 825.15 KB
Description High-Speed USB 2.0 (480Mbps) DPST Switch
Datasheet download datasheet ISL54227 Datasheet
Other Datasheets by Renesas

Full PDF Text Transcription

Click to expand full text
DATASHEET ISL54227 High-Speed USB 2.0 (480Mbps) DPST Switch with Overvoltage Protection (OVP) and Dedicated Charger Port Detection FN7593 Rev 1.00 September 5, 2013 The Intersil ISL54227 is a single supply, dual SPST (Single Pole/Single Throw) switch that is configured as a DPST. It can operate from a single 2.7V to 5.25V supply. The part was designed for switching or isolating a USB high-speed source or a USB high-speed and full-speed source in portable battery powered products. The 3.5SPST switches were specifically designed to pass USB full speed and USB high speed data signals. They have high bandwidth and low capacitance to pass USB high speed data signals with minimal distortion.The device has two logic control input pins (OE and LP) to control the SPST switches.
Published: |