Datasheet4U Logo Datasheet4U.com

ISL54221 - High-Speed USB 2.0 (480Mbps) Multiplexer

Description

TEMP.

PKG.

DWG.

GL -40 to +8

Features

  • High-Speed (480Mbps) and Full-Speed (12Mbps) Signaling Capability per USB 2.0.
  • 1.8V Logic Compatible (2.7V to +3.6V supply).
  • Enable Pin to Open all Switches.
  • Power OFF Protection.
  • D-/D+ Pins Overvoltage Tolerant to 5.5V.
  • -3dB Frequency.
  • . 742MHz.
  • Low ON Capacitance.
  • . . . . 7.4pF.
  • Low ON-Resistance.
  • . 6.

📥 Download Datasheet

Datasheet Details

Part number ISL54221
Manufacturer Renesas
File Size 872.57 KB
Description High-Speed USB 2.0 (480Mbps) Multiplexer
Datasheet download datasheet ISL54221 Datasheet

📁 Similar Datasheet

  • ISL5100A - Quad 18V Pin Electronics Driver/Window Comparator (Intersil Corporation)
  • ISL5239 - Pre-Distortion Linearizer (Intersil Corporation)
  • ISL55112 - High-Speed Dual Precision CCD Driver (Intersil Corporation)
  • ISL55161 - SOC Dual Channel 400MHz Pin Electronics/DAC/PMU (Elevate)
  • ISL55162 - SOC Dual Channel 300MHz Pin Electronics/DAC/PMU/Deskew (Elevate)
  • ISL55163 - SOC Dual Channel 400MHz Pin Electronics/DAC/PMU (Elevate)
  • ISL55180 - SOC 8-Channel DPS (Elevate)
  • ISL55185 - SOC Octal Wide Voltage PMU/Load (Elevate)
  • ISL55187 - SOC Pin Electronics Companion PMU/DAC (Elevate)
  • ISL55188 - Wide Voltage Pin SOC (Elevate)
Other Datasheets by Renesas
  • ISL54220 - High-Speed USB 2.0 (480Mbps) Multiplexer
  • ISL54222 - High-Speed USB 2.0 (480Mbps) Multiplexer
  • ISL54222A - High-Speed USB 2.0 (480Mbps) Multiplexer
  • ISL54223 - High-Speed USB 2.0 (480Mbps) Multiplexer
  • ISL54224 - High-Speed USB 2.0 (480Mbps) Multiplexer
  • ISL54225 - High-Speed USB 2.0 (480Mbps) Multiplexer
  • ISL54226 - High-Speed USB 2.0 (480Mbps) DPST Switch
  • ISL54227 - High-Speed USB 2.0 (480Mbps) DPST Switch

Full PDF Text Transcription

Click to expand full text
ISL54221 High-Speed USB 2.0 (480Mbps) Multiplexer The Intersil ISL54221 is a single supply dual 2:1 multiplexer that can operate from a single 2.7V to 5.5V supply. It contains two SPDT (Single Pole/Double Throw) switches configured as a DPDT. The part was designed for switching or routing of USB High-Speed signals and/or USB Full-speed signals in portable battery powered products. The 6.7switches can swing rail to rail and were specifically designed to pass USB full-speed data signals that range from 0V to 3.3V and USB high-speed data signals that range from 0V to 400mV. They have high bandwidth and low capacitance to pass USB high-speed data signals with minimal distortion.
Published: |