Datasheet4U Logo Datasheet4U.com

F0472 - Dual Path RF Switch

General Description

The F0472 is an integrated dual-path RF front-end consisting of an RF switch and two gain stages with 6dB gain control used in the analog front-end receiver of an Active Antenna System (AAS).

The F0472 supports frequencies from 2.3GHz to 2.7GHz.

The F0472 provides 34dB gain with +15dBm OP1dB, and 1.

Key Features

  • Gain.
  • 34dB typical in High Gain Mode.
  • 28dB typical in Low Gain Mode.
  • 1.2dB typical NF.
  • OP1dB.
  • +15dBm typical in High Gain Mode.
  • +14dBm typical in Low Gain Mode.
  • 50Ω single-ended input / output amplifier impedances.
  • IDD = 130mA.
  • Independent Standby Mode for power savings.
  • Supply voltage: +3.15V to +3.45V.
  • 5 × 5 mm, 32-VFQFPN package.
  • -40°C to +105°C exposed pad operating temperature range Block Diagram RX1_OUT VDD.

📥 Download Datasheet

Datasheet Details

Part number F0472
Manufacturer Renesas
File Size 148.35 KB
Description Dual Path RF Switch
Datasheet download datasheet F0472 Datasheet

Other Datasheets by Renesas

Part Number Description
F0424 High-Gain Broadband RF Amplifier
F0440 Dual Matched Broadband RF DVGA
F0443 Dual Matched Broadband RF DVGA
F0448 Dual Matched Broadband RF DVGA
F0452B Dual Path RF Switch
F0452C Dual Path RF Switch
F0453B Dual Path RF Switch
F0453C Dual Path RF Switch

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
Dual Path RF Switch with LNA and DVGA 2.3GHz to 2.7GHz F0472 Short-Form Datasheet Description The F0472 is an integrated dual-path RF front-end consisting of an RF switch and two gain stages with 6dB gain control used in the analog front-end receiver of an Active Antenna System (AAS). The F0472 supports frequencies from 2.3GHz to 2.7GHz. The F0472 provides 34dB gain with +15dBm OP1dB, and 1.2dB noise figure (NF). Gain is reduced 6dB in a single step with a maximum settling time of 35ns. The device uses a single 3.3V supply and 130mA of IDD. The F0472 is offered in a 5 × 5 × 0.8 mm, 32-pin package with 50Ω input and output amplifier impedances for ease of integration into the signal path. Typical Applications  Multi-mode, multi-carrier receivers  4.